3
1.3. Before electric work
Caution:
%HVXUHWRLQVWDOOFLUFXLWEUHDNHUV,IQRWLQVWDOOHGHOHFWULFVKRFNPD\UHVXOW
3OHDVHIROORZDSSOLFDEOHIHGHUDOVWDWHRUORFDOFRGHVWRSUHYHQWSRWHQWLDO
leakage/electric shock. Or install a ground fault interrupt for the prevention
of leakage and electric shock.
)RUWKHSRZHUOLQHVXVHVWDQGDUGFDEOHVRIVXI¿FLHQWFDSDFLW\2WKHUZLVHD
VKRUWFLUFXLWRYHUKHDWLQJRU¿UHPD\UHVXOW
:KHQLQVWDOOLQJWKHSRZHUOLQHVGRQRWDSSO\WHQVLRQWRWKHFDEOHV,IWKH
connections are loosened, the cables can snap or break and overheating or
¿UHPD\UHVXOW
%HVXUHWRJURXQGWKHXQLW'RQRWFRQQHFWWKHJURXQGZLUHWRJDVRUZDWHU
pipes, lightning rods, or telephone grounding lines. If the unit is not prop-
erly grounded, electric shock may result.
8VHFLUFXLWEUHDNHUVJURXQGIDXOWLQWHUUXSWHULVRODWLQJVZLWFK%IXVH
DQGPROGHGFDVHFLUFXLWEUHDNHUZLWKWKHVSHFL¿HGFDSDFLW\,IWKHFLUFXLW
EUHDNHUFDSDFLW\LVODUJHUWKDQWKHVSHFL¿HGFDSDFLW\EUHDNGRZQRU¿UH
may result.
1.4. Before starting the test run
Caution:
7XUQRQWKHPDLQSRZHUVZLWFKPRUHWKDQKRXUVEHIRUHVWDUWLQJRSHUDWLRQ
Starting operation just after turning on the power switch can severely damage
the internal parts. Keep the main power switch turned on during the operation
season.
%HIRUHVWDUWLQJRSHUDWLRQFKHFNWKDWDOOSDQHOVJXDUGVDQGRWKHUSURWHFWLYH
parts are correctly installed. Rotating, hot, or high voltage parts can cause
injuries.
'RQRWWRXFKDQ\VZLWFKZLWKZHWKDQGV(OHFWULFVKRFNPD\UHVXOW
'R QRW WRXFK WKH UHIULJHUDQW SLSHV ZLWK EDUH KDQGV GXULQJ RSHUDWLRQ 7KH
UHIULJHUDQWSLSHVDUHKRWRUFROGGHSHQGLQJRQWKHFRQGLWLRQRIWKHÀRZLQJ
refrigerant. If you touch the pipes, burns or frostbite may result.
$IWHUVWRSSLQJRSHUDWLRQEHVXUHWRZDLWDWOHDVWPLQXWHVEHIRUHWXUQLQJRII
the main power switch. Otherwise, water leakage or breakdown may result.
8VLQJ5$UHIULJHUDQWDLUFRQGLWLRQHUV
Caution
8VH&FRSSHUSKRVSKRUXVIRUFRSSHUDQGFRSSHUDOOR\VHDPOHVVSLSHV
to connect the refrigerant pipes. Make sure the insides of the pipes are clean
and do not contain any harmful contaminants such as sulfuric compounds,
R[LGDQWVGHEULVRUGXVW8VHSLSHVZLWKWKHVSHFL¿HGWKLFNQHVV5HIHUWR
SDJH1RWHWKHIROORZLQJLIUHXVLQJH[LVWLQJSLSHVWKDWFDUULHG5UHIULJHUDQW
5HSODFHWKHH[LVWLQJÀDUHQXWVDQGÀDUHWKHÀDUHGVHFWLRQVDJDLQ
- Do not use thin pipes. (Refer to page 6)
6WRUHWKHSLSHVWREHXVHGGXULQJLQVWDOODWLRQLQGRRUVDQGNHHSERWKHQGVRI
WKHSLSHVVHDOHGXQWLOMXVWEHIRUHEUD]LQJ/HDYHHOERZMRLQWVHWFLQWKHLU
packaging.) If dust, debris, or moisture enters the refrigerant lines, oil dete-
rioration or compressor breakdown may result.
8VHHVWHURLOHWKHURLODON\OEHQ]HQHRLOVPDOODPRXQWDVWKHUHIULJHUDWLRQ
RLODSSOLHGWRWKHÀDUHGVHFWLRQV,IPLQHUDORLOLVPL[HGLQWKHUHIULJHUDWLRQ
oil, oil deterioration may result.
'RQRWXVHUHIULJHUDQWRWKHUWKDQ5$UHIULJHUDQW,IDQRWKHUUHIULJHUDQWLV
used, the chlorine will cause the oil to deteriorate.
1.6. Precautions for salt damage–resistant model
(“-BS” model)
Although this product (only “-BS” model) has been designed to be resistant to salt
damage, observe the following precautions to maintain the performance of the unit.
1. Avoid installing the unit in a location where it will be exposed directly to seawater
or sea breeze.
2. If the cover panel may become covered with salt, be sure to install the unit in a
location where the salt will be washed away by rainwater. (If a sunshade is installed,
LWPD\EHGLI¿FXOWIRUUDLQZDWHUWRFOHDQWKHSDQHO
3. To ensure that water does not collect in the base of the outdoor unit, make sure
that the base is level, not at angle. Water collecting in the base of the outdoor unit
could cause rust.
8VHWKHIROORZLQJWRROVVSHFL¿FDOO\GHVLJQHGIRUXVHZLWK5$UHIULJHUDQW
The following tools are necessary to use R410A refrigerant. Contact your
nearest dealer for any questions.
Tools (for R410A)
Gauge manifold
Flare tool
Charge hose
Size adjustment gauge
Gas leak detector
Vacuum pump adapter
Torque wrench
Electronic refrigerant charging scale
%HVXUHWRXVHWKHFRUUHFWWRROV,IGXVWGHEULVRUPRLVWXUHHQWHUVWKHUHIULJHU
-
ant lines, refrigeration oil deterioration may result.
'RQRWXVHDFKDUJLQJF\OLQGHU,IDFKDUJLQJF\OLQGHULVXVHGWKHFRPSRVLWLRQ
RIWKHUHIULJHUDQWZLOOFKDQJHDQGWKHHI¿FLHQF\ZLOOEHORZHUHG
1. Safety precautions
4. If the unit is installed in a coastal area, clean the unit with water regularly to remove
any salt build-up.
5. If the unit is damaged during installation or maintenance, be sure to repair it.
6. Be sure to check the condition of the unit regularly.
7. Be sure to install the unit in a location with good drainage.
