Mitsubishi Electric PAC-USWHS002-WF-1, Руководство техника

Страница: 29 / 40

29
© 2021 Mitsubishi Electric US, Inc.
Specifications are subject to change without notice.
Airflow for Static Pressure
Connect
Program Settings Home
Cancel Back
Is the unit ductless?
Living Room
YES
NO, SET AIRFLOW
Set airflow for ducted models
including MVZ and SEZ.
1
Unit
Program Settings Home
Site
Living Room
Signal: Strong
Auto Mode: No
Display Offset: 0º
ADVANCED
DELETE UNIT
Advanced
Program Settings Home
Unit
Living Room
Dehumidify/Dry: No
Pressure
Program Settings Home
Back
DELETE SETTING
Living Room
Airflow for the PEAD model indoor
unit is set for external static
pressure of 0.2 inches WC.
Set Airflow
2
Min Cool Setpoint: 60º
Max Heat Setpoint: 88º
Thermal Off Fan: Very low…
Static Pressure: 0.2 inches
System Type: CCooooll aanndd H Heeaatt
4
FFiirrm mw waarree:: 00..0000..00
3
Airflow can be set when Adding an Indoor Unit or after all the units have been added. Airflow can be set for
SEZ, PEA, PEAD, MVZ, SVZ, and PVA units using kumo cloud
®
. For other ducted models, see the install
manual and set the dip switches before adding the units in kumo cloud.
1. To Add Indoor Units, see the Add Indoor Units section. Then, tap No, Set Airflow .
Or
2. Access the indoor unit settings as shown in the
Access Unit Settings
section, then tap Advanced .
3. Tap Static Pressure .
4. Tap Set Airflow .
SEZ or PEA
PEAD
MVZ or PVA -AA# models
MVZ or PVA -AA4
Connect
Program Settings Home
Cancel Back
Living Room
Which type of unit is this?
5
Back Connect Cancel
Living Room
Adjust blower as needed for
static pressure.
0.14 inch WC
0.2 inch WC
7
0.28 inch WC
SAVE
8
Home Program Settings
Connect
Program Settings Home
Cancel Back
Living Room
How is the air handler installed?
Vertical position
Horizontal left or right
Downflow position
6
5. Tap the Unit Model Type . For MVZ, SVZ or PVA units, note the model number; newer models handle
backup heat differently than model numbers ending in AA4.
6. For MVZ, SVZ, or PVA units, select the Position .
7. Tap the appropriate Pressure Setting . For MVZ or PVA - AA# models, follow the prompts to set backup
heat options (not shown).
8. If setting airflow while Adding an Indoor Unit, tap Save to move on to complete the Add Unit. See the
Add Unit section.