Mitsubishi Electric PAC-USWHS002-WF-1, Руководство техника

Страница: 10 / 40

10
Specifications are subject to change without notice. © 2021 Mitsubishi Electric US, Inc.
Define Changeover Settings
Back
Connect
Cancel
Living Room
Home Program Settings
SAVE
ADVANCED
>
Signal: Very strong
Auto Mode: Yes
Changeover Group: Guest House
Changeover Settings
Display Offset: 0°
Back
Changeover
Guest House
Home Program Settings
Priority: Not set
Run minimum :: 20 minutes
Standby max: 3 hours
Improve System Changeover
during frequent changes
between cool and heat.
2
1
1. When provisioning a zone in the kumo cloud ® app,
if
the zone has been added to a system changeover
group, the Connect screen displays the Changeover Settings option. Tap Changeover Settings .
2. To set priority zone(s), maximum standby time and minimum run time, tap Priority , Standby max , and
Run minimum , respectively.
Back
Priority
Which zone or zones have
priority if two or more zones
call for cool and heat at the
same time?
Home Program Settings
3
Living Room
Not set
Back
Standby
How long does an indoor
unit wait in standby before the
system switches to cool or
heat?
Home Program
Settings
4
30 minutes
3 hours
1 hour
2 hours
4 hours
Back Run
How long should the system
stay in cool or heat before
switching?
Home Program Settings
5
10 minutes
20 minutes
30 minutes
40 minutes
3. On the
Priority
screen, select the required priority zone(s). There is no limit to the number of zones that
you can select. If you do not want to select any unit, select
Not set
.
4. On the
Standby
screen, select the required standby time.
5. On the
Run
screen, select the required run time.
To return to the previous screen(s) at any time, tap
Back
in the upper-left corner of the screen. Return
to the Connect screen after you have defined the Changeover Settings. Proceed to Finish Setup . See
the Finish Setup section.
To define Changeover Settings after a zone is provisioned in the kumo cloud app, proceed as follows:
1. In the kumo cloud app, tap Settings > System Setup > Installer Settings .
2. Enter the installer login (9999).
3. Tap the required site and then tap the zone.
4. Select and define the required Changeover Settings as explained above.