25
© 2021 Mitsubishi Electric US, Inc.
Specifications are subject to change without notice.
Humidifier
Program
Settings
Home
Ba
ck
Now:
30
%
Mode:
Auto
Auto Setting:
40%
OFF
45%
50%
1
Humidifier
40%
MORE
Humidifier
Settings
Home
Program
SAVE
Sensor:
Kitchen
Outside air temperature:
73°
Wired to Kitchen interface
Channel 4, sensor
Auto setting:
5
Home
Program
NEXT
Outside air temperature:
73°
Which remote sensor affects
the Humidifier?
W
Wiirreelleessss SSeennssoorr:: BBeeddrroooom
m
Humidifier
4
Yes
Home
Program
NEXT
Should the fan on the Kitchen
Indoor unit run when the
humidifier runs? For in duct
humidifiers select Yes
No
2
Humidifier
Wireless Sensor: Kitchen
3
Note:
●
The system must be configured and installed with a Wireless Temperature and Humidity Sensor. See the
Add Wireless Sensor
section.
●
If an MHK2 controller is present and configured to relay its own room temperature and humidity reading,
kumo cloud
®
uses humidity readings from the MHK2 instead of the wireless sensor to control a humidifier,
display humidity readings in the app, etc.
Add kumo station Accessory. Then,
1.
Select the mode for the humidifier:
OFF
- Disable the dehumidifier.
-
Auto
-Runs the humidifier as needed to meet the target relative humidity percentage.
When the
Mode
is set to
, set the target relative humidity percentage. See the
Save Unit Settings
section.
2. Indicate whether the
Indoor unit fan should be interlocked
with this humidifier.
Note: Only the indoor unit physically attached to the kumo station (if any) can be interlocked with the
humidifier.
3. Select the
Zone
that will provide the humidity reading. *
Note: This zone must have been
previously
configured
with a Wireless Sensor.
Zones with connected MHK2 controllers appear as options in the
list of zones that provide humidity readings e.g. MHK2: Living Room and Wireless Sensor: Bedroom.
4. Tap
Next
.
5. Verify settings and tap
Save
.
