32
(4) Press
button to complete and transmit the weekly timer setting.
*
which was
blinking goes out, and
the current time will be
displayed.
NOTE:
• Press
button to transmit the setting information of weekly timer to the indoor unit. Point the remote controller toward the
indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
button does not have to be pressed per each
setting. Press
button once after all the settings are complete. All the weekly timer settings will be saved.
• Press
button to enter the weekly timer setting mode, and press and hold
button for 5 seconds to erase all weekly
timer settings. Point the remote controller toward the indoor unit.
(5) Press
button to turn the weekly timer ON. (
lights.)
• When the weekly timer is ON, the day of the week whose timer setting is complete, will light.
Press button again to turn the weekly timer OFF. (
goes out.)
NOTE:
The saved settings will not be cleared when the weekly timer is turned OFF.
2. Checking weekly timer setting
(1) Press
button to enter the weekly timer setting mode.
*
blinks.
(2) Press
or
buttons to view the setting of the particular day or number.
(3) Press
button to exit the weekly timer setting.
NOTE:
When all days of the week are selected to view the settings and a different setting is included among them,
will be
displayed.
8-11. SMART SET ( ) OPERATION
1. How to SET SMART SET operation
(1) Press OFF/ON (stop/operate) button.
(2) Select COOL or HEAT
(MSZ)
mode.
(3) Press SMART SET button.
(4) Set the temperature, fan speed, and airflow direction for SMART SET operation.
NOTE:
• SMART SET operation cannot be selected during DRY or AUTO mode operation.
• The setting range of HEAT
mode in SMART SET operation is between 50°F (10°C) and 61 - 88°F (16 - 31°C)
(
MSZ-GS30/36NA
), 50°F - 88°F (10 - 31°C) (
other MSZ models
).
• 2 settings can be saved. (One for COOL, one for HEAT)
(MSZ)
.
• 1 setting can be saved.
(MSY)
.
2. How to cancel operation
• Press SMART SET button again.
• SMART SET operation can also be cancelled by pressing Operation select button to change the operation mode.
The same setting will be selected from the next time by simply pressing SMART SET button.
OBH874A
