Mitsubishi Electric Mr.Slim MA Series Скачать руководство пользователя страница 27

Страница: 27 / 130

Night setback

Setting display:

Night setback Yes

Temp. range 19 - 28

Start 23:00

Stop 5:00

6. Night setback

Button operation

Main

[2]

The current settings will appear.

Press the

SELECT

button to go to the setting screen.

[1]

Select "Night setback" from the Timer menu, and press the

SELECT

but-

ton.

This control starts heating operation when the control object group is stopped and the room temperature drops below the pre-

set lower limit temperature. Also, this control starts cooling operation when the control object group is stopped and the room

temperature rises above the preset upper limit temperature.

The Night setback function is not available if the operation and the temperature setting are performed from the remote control-

ler.

If the room temperature is measured by the air-conditioner's suction temperature sensor, the accurate temperature may not

be obtained when the air-conditioner is inactive or when the air is not clean. In this case, switch the sensor to a remote sensor

(PAC-SE40TSA/PAC-SE41TS-E) or a remote control sensor.

[3]

Move the cursor to the desired item with the

button out of Night

setback No (disable)/Yes (enable), Temp. range, Start time, or Stop time.

Change the settings with the

button.

• Temp. range:

The lower limit temperature (for heating operation) and the

upper limit temperature (for cooling operation) can be set. The

temperature difference between the lower and upper limits

must be 4°C (8°F) or more. The settable temperature range

varies depending on the connected indoor units.

* 1°C increments

• Start/Stop time:

settable in 5-minute increments

*Press and hold the button to rapidly advance the numbers.

Press the

SELECT

button to save the settings.

A confirmation screen will appear.

Navigating through the screens

• To go back to the Main menu .................. MENU button
• To return to the previous screen ............... RETURN button

Night setback

Select:

Cursor

Main menu:

Night setback No /

Yes

Temp. range 19 - 28

Start 23:00

Stop 5:00

Night setback

Yes

Temp. range 19 - 28

Start 23:00

Stop 5:00

Changes saved

Cur.

Night setback

Select:

Cursor

Main menu:

Night setback No /

Yes

Temp. range 19 - 28

Start 23:00

Stop 5:00

Night setback

Yes

Temp. range 19 - 28

Start 23:00

Stop 5:00

Changes saved

Cur.

Main menu:

Cursor

Timer menu

Timer

Weekly timer

OU silent mode

Night setback

MA REMOTE CONTROLLER

. FUNCTION SETTINGS [P

AR-40MAA]

D-27

MA REMOTE CONTROLLER

Содержание Mr.Slim MA Series



































































































































Результаты поиска

Содержание Mr.Slim MA Series

Отзывы:

Похожие инструкции для Mr.Slim MA Series

Бренды по названию

Популярные бренды

Mitsubishi Electric Mr.Slim MA Series, Руководство пользователя

Результаты поиска

Содержание Mr.Slim MA Series

Отзывы:

Похожие инструкции для Mr.Slim MA Series

Бренды по названию

Популярные бренды