Mitsubishi Electric Mr.Slim MA Series Скачать руководство пользователя страница 31

Страница: 31 / 130

Button operation

Cool

Room

Auto

Set temp.

Mode

Fan

Fri

[2]

The screen to make the settings for the operation lock function will appear.

Move the cursor to the desired item with the

button out of "Op-

eration locked", “Location”, "On / Off", "Mode", "Set temp.", "Menu",

"Fan", "Louver", or "Vane".

Change the settings with the

button.

When “Hotel” is selected for the “Location” setting,the following operations will be

locked automatically:Mode, Vane, Menu, and Louver.

To display the main menu while the menu setting is being locked, press and hold
the Menu button for ten or more seconds.

Enter the administrator’s password on the password input screen.

[1]

Bring up the Restriction setting screen. (refer to D-29)

Move the cursor to "Operation locked" and press the

SELECT

button.

Press the

SELECT

button to save the settings.

A confirmation screen will appear.

7.2. Operation lock function

(When Set temp. is locked)

• Operation locked:

No (disable) / Yes (enable)

• Location:

“Individual” or “Hotel”

• On / Off:

On/Off operation

• Mode:

Operation mode setting – / Locked

• Set temp.:

Preset temp. setting

• Vane:

Vane setting

• Menu:

Menu setting

•

Fan:

Fan speed setting

•

Louver:

Louver setting

• To enable the operation lock function, set the item "Operation locked" to "Yes".
• The On / Off operation, Operation mode setting, Preset temp, Setting and Vane Setting operations can all be restricted.

Navigating through the screens

• To go back to the Main menu .................. MENU button
• To return to the previous screen ............... RETURN button

7. Restriction

Restriction

Setting display:

Page

Restriction

Operation locked No

On/Off

　Mode　Set temp.

Vane

Fan

Louver

Operation locked Yes

On/Off

　Mode　

Set temp.

Vane

Fan

Louver

Main menu:

Changes saved

Restriction

Select:

Cursor

Operation

locked No /

Yes

Location

On/Off

Mode

Set temp.

Indiv.

/Hotel

/Locked

Locked

Restriction

Setting display:

Page

Restriction

Operation locked No

On/Off

　Mode　Set temp.

Vane

Fan

Louver

Operation locked Yes

On/Off

　Mode　

Set temp.

Vane

Fan

Louver

Main menu:

Changes saved

Restriction

Select:

Cursor

Operation

locked No /

Yes

Location

On/Off

Mode

Set temp.

Indiv.

/Hotel

/Locked

Locked

will appear on the Main display in the Full mode when the operation lock

function setting is enabled.

Operation guide that corresponds to the locked function will be suppressed.

MA REMOTE CONTROLLER

. FUNCTION SETTINGS [P

AR-40MAA]

D-31

MA REMOTE CONTROLLER

Содержание Mr.Slim MA Series



































































































































Результаты поиска

Содержание Mr.Slim MA Series

Отзывы:

Бренды по названию

Популярные бренды

Mitsubishi Electric Mr.Slim MA Series, Руководство пользователя

Результаты поиска

Содержание Mr.Slim MA Series

Отзывы:

Бренды по названию

Популярные бренды