Mitsubishi Electric MR-S45N, Руководство по эксплуатации

Страница: 26 / 32

26
What to do
(until a “beep” sound is heard).
The mark will come on.
Blinking
Stay lit
1
Press button and select the
refrigerator.
2
Press and buttons
simultaneously for about 3 seconds.
1
Press button and display the required
compartment for temperature adjustment.
2
Press button repeatedly and
adjust temperature.
Electric power goes out
1
Clean the automatic ice maker.
2
After removing the power plug from the outlet, clean
the interior of the unit. Leave the doors open for 2 to
3 days to sufficiently dry the interior of the unit.
* Failure to sufficiently dry the interior of the unit can cause molding,
odours, and refrigerant (gas) leakage due to corrosion of the condenser.
The unit will not be used for a long period of time
1
2
2
4
Discard the water and ice in the water
tank and the ice tray.
Wear some protection such as work-gloves.
3
Discard water collected in the drain pan.
Gently transport the unit with 2 or
more people, gripping the hand-holds
on the lower-front interior and the
upper-rear of the unit.
Front Lower interior Gripping the hand-holds
on the upper
Transporting the unit
To make fine adjustments of temperature
(Fine Adjustments mode)
When [E56] appears on the LCD
or the alarm does not stop
Setting to fine adjustment mode
Fine temperature adjustment
Temperature
bar
Refrain from frequently opening and closing the refrigerator doors,
and avoid storing additional items.
Setting for modes other than temperature may change. Please check.
(Child Lock, Energy-Saving, Fast Cooling, etc.)
Do not lay the unit on its side (doing so can cause
malfunction of the compressor).
When the alarm does not stop, press the button for 5
seconds for the alarm to stop.
After the alarm has stopped, Please contact the retail store at
which you purchased it or a Mitsubishi Electric Maintenance
Service or Customer Service representative.
Repeat the operation explained above.
To release
(A “beep” sound is heard).
page
23
page
23
page
24
page
31
Warning
It uses flammable refrigerant, do not damage the refrigerant
circuit.
• If the gas leaks, ignition or explosion may be caused.
You can set fine adjustment mode for the
refrigerator, freezer or versa compartments
when selecting settings for “REF” or “FZR”.
mark
When selecting the versa compartment, the
light of the temperature control display first
blinks and then stays on to perform the
setting.
Please contact the retail store at which you
purchased the refrigerator or a Mitsubishi Electric
Maintenance Service or Customer Service
representative.
T
roub
leshooting