Mitsubishi Electric MR-S45N, Руководство по эксплуатации

Страница: 24 / 32

24
Removing and Maintaining the Accessories
1
1
2
Push the shelf inward, then lift
and pull forward.
Maintenance and Cleaning
Drain pan
Two-way flexishelf
Wipe or remove and wash parts with water.
To remove oily deposits, wet a cloth with warm water or
dishwashing detergent and wipe.
(Be sure to wipe off all oily deposits. Oily deposits can cause
plastic parts to break.)
Be sure to wipe off any detergent you used.
Be sure to read all instructions and heed precautions for
chemically treated disposable cloths you use to clean parts.
Do not use alcohol, benzene, steel wool or alkaline-base
detergents. They will cause damage to plastic parts (door
handles, cap, cases, etc.) and coating.
1
Remove the toe grille by pressing the left
and right sides inward while pulling forward.
2
Hold the drain pan with two hands and pull
out gently.
Elevating Shelves
Disassembling or applying grease to the Elevating Shelves can cause it to malfunction.
Removal
2
Push up each support, one at a time,
with a strong effort. (4 supports)
(When the internal hooks are released
from the refrigerator, a “click” sound
will be heard.)
3
After the 4 supports are released,
pull out the shelf.
1
Move the lever completely to the right.
Installation
2
Make sure that the 4 metal stoppers are securely
fitted into the refrigerator, then lightly set the shelf
into the refrigerator and align the 4 supports with the
4 stoppers.
4
Finally, move the lever to the left and right and check
that the shelf moves up and down while remaining
level. (If the shelf does not remain level, the 4 hooks
are not securely caught onto the refrigerator.
Remove the shelf and repeat steps
1
to
4
.)
3
Push each of the 4 supports,
one at a time, downward from
above. (When the internal
hooks catch onto the
refrigerator, a “click” sound
will be heard.)
1
Make sure that the lever is moved
completely to the right.
Tray removal
2
Lift up the back of the tray until the front
hooks (3) and side hooks (2) are released.
* Lift up the tray slowly, otherwise it may fall.
3
Remove the tray with both hands.
1
Push the hooks (3) at the back of the
tray upward with your finger.
If the supports are not released easily,
push the internal hooks inward.
Maintenance
Remove the power plug
from the socket.
Wait at least 10 minutes before you replace the power plug.
The refrigerator will not operate if the plug is replaced immediately
after it is removed.
Failure to remove the plug may
result in electric shock.
Warning
Before you start
MR̲S45N(NZ)̲ENG̲CS3.indd 24 08.6.19 9:57:36 AM