Mitsubishi Electric MR-S45N, Руководство по эксплуатации

Страница: 22 / 32

22
Maintaining the Automatic Ice Maker
Water tank
Water supply pipe
Pipe junction
Pipe
Tank holder
(on the refrigerator body)
Be careful not to
pinch any foreign
object.
Insert horizontally
While pushing the
tab downward with your
finger, pull the cover off.
Tab
Pipe
Water
supply
pump
Impeller
Cap
Cover
Light-type bacteria
removing filter
Cleaning once a week
Remove the lid and
wash with water.
(the tank can
withstand up to
approximately
60°C)
1
Pull out the pipe.
Twist the pump to remove it.
2
Disassemble and wash the parts
with water.
3
Reverse the steps to replace the pump.
Water tank
Pipe
Improper reassembling might cause failed ice making or increased noise.
Check the following.
Fit the filter cover’s tab (1) and
hook (2) into the cap.
1
Align the marks on the
pipe and the water tank.
4
Rotate the cap and catch the cap
hook
1
onto the water supply
pump projection
2
.
2
Securely rotate the water supply pump
into the water tank to install it.
3
*Make sure that the impeller is in the pump.
Pipe
mark
Water tank
Light-type
bacteria
removing filter
Impeller
Rotate
Rotate
Water tank
Reassembly points
Water tank Water supply pump / Light-type bacteria removing filter
Cleaning once a month
Cleaning once a month
1
Pull out water supply
pipe. Wipe the tank
holder with clean cloth.
2
Separate pieces and
wash with water.
3
Reverse steps to
replace the pipe.
Side A
Side B
Aluminum pipe
Seal
Water supply
pipe
Tank holder
Water supply pipe / Tank holder
Do not let water flow into the
tank holder.
The impeller is magnetic. Wash carefully
to remove all foreign objects.
The products above give ice odours.
Normally the filter need not be replaced.
However, replace it in the following
conditions:
•When the filter is clogged by passing
something other than water through the
filter.
•When the filter is broken.
•When the filter is moldy.
In such cases, contact the dealer that you
purchased this refrigerator.
Twist on the aluminum pipe
to replace it.
*The water supply pipe may be
white due to minerals or chlorine,
but this is not abnormal. Wash the
pipe and continue using it.
Replace the water supply pipe. Be
sure that sides A and B fit flush
against each other. Otherwise, the ice
maker may malfunction if the pipe is
not installed properly.
Improper fitting or any foreign object
will produce a clearance between the
pipe and the pipe junction to cause
freezing of the water tank.
* Make sure that no foreign object is
found between the water supply
pipe and the pipe junction.
Water supply
pipe
Do not use kitchen detergent,
benzene, bleach or other cleaning
products to clean the light-type
bacteria removing filter.
Be sure to read all instructions for
detergents, bleach and other
cleaning products you use to clean
the water tank and lid.
Note
Maintenance