Mitsubishi Electric MR-S45N, Руководство по эксплуатации

Страница: 11 / 32

11
Initial settings of each compartment at delivery are as follows. Refrigerator, Vegetable and Freezer Compartments are
set to “M”, the Versa Compartment is set to “REF” and the Ice Making Compartment is set to “REG”.
The temperatures can be adjusted according to personal preference.
When you want to use a lot of ice,
Select . Ice can be more quickly
made than usual.
When you want to make clear ice cubes,
It will take longer time to make the ice than
usual. (approx 5-8 hours)
* Unable to select “Quick ice making mode”.
When you do not use ice in winter,
this compartment can be used as a freezer.
Before using this compartment as a freezer,
clean the water supply system.
Display the ice making
compartment.
Check here to see
the ice maker
setting
To change the setting for the Ice Making compartment
To use the Ice Making compartment as a refrigerator
To start making ice again
* The illustration above is a display example. The displayed temperature may be
different depending on the ice maker setting or conditions to use.
1
Remove the foods and ice in the water tank and
ice making compartment.
2
Press button to display the Ice Making compartment.
Press button and hold for about 3 seconds
(until a “beep” sound is heard.) Then the indicator
blinks and stays lit.
3
Select or .
4
Select the temperature mode to REF when you don’t make ices
in winter.
Three ice maker settings are provided.
1
2
Press button to display the
ice making compartment.
Press button repeatedly to make
your required ice maker setting blink.
After each pressing of the button, the blinking display
of the ice maker setting will change.
After the blinking display is left for a
while, it will stay lit and the mode is
set to the lighting display.
The beep sound is heard
turns on after a while.
After about 1 minute later, clean the water tank and
ice making compartment.
No cleaning will produce molding. When using the “STOP” or “REF” setting
page
23
page
23
page
12
Short Notes
for Users
The temperature value indication is meant for
estimated food temperature at a specific area inside
the product. (The temperature is different from the
compartment temperature inside the product.) Due
to this reason, the temperature indication is not
immediately changed by opening and closing the
compartment doors or changing the temperature
control setting.
The compartment temperature inside the product
may rise or fall for a short period before or after a
defrosting cycle and this is a normal phenomenon.
The indicated temperatures used as guidelines here
are based on the stabilized temperature which was
measured slightly lower than the center part of the
product under the condition of room temperature
30˚C, without placing any food inside the
compartment with all doors closed.
After the temperature control setting for the versa
compartment is changed, the temperature indicated
on (LCD section) may vary for a while.
See “To change the setting for the Ice Making compartment” above.
(Regular ice
making)
(Crystal ice
making)
(Stop ice
making)
Smar
t
Tips f
or Using the Refrig
erator