Mitsubishi Electric MR-S45N, Руководство по эксплуатации

Страница: 13 / 32

13
If you want to control the temperature for each compartment
( ), cancel the timer mode before making the settings.
Press and hold buttons simultaneously
for 1 second
and
1
2
To stop the timer halfway through the operation, press
button again.
Repeat the operation explained above. To release
Repeat the operation explained above.
To release
Repeat the operation explained above.
To release
To enter the Timer Mode
Cooking Timer
It can also be used as an alarm at the completion of cooking time.
Child Lock Energy-Saving operation
Re-setting
* The illustration is a display example. The displayed example may be different
depending on the setting or conditions of use.
Time is displayed
instead of the
present temperature.
The icon blinks
during the operation.
To set the time and start
Blinking
Short Notes
for Users
In case of using “Cooking Timer” and “Fast Cooling” concurrently, start “Fast Cooling” mode first followed by “Cooking Timer” setting.
No other setting is available while using the “Cooking Timer”, therefore cancel the timer mode before making the settings.
While using the “Cooking Timer”, control panel light stays “ON”.
(until a “beep” sound is heard).
Press buttons simultaneously and hold
down for about 3 seconds
and
(until a “beep” sound is heard).
(until a “beep” sound is heard).
There are no changes in temperature control for “Ice Making
Compartment” and “Versa Compartment”.
Press buttons.
Press button and hold down for about 3 seconds
comes on in the LCD section.
turns on.
The number blinks on the
display.
Press button to set the timer.
The number returns to “0”. (It does not blink)
page
10
The timer mode is
not released.
It rejects any mischievous tampering or
unintentional pressing of control panel settings.
It re-sets all settings of “Temperature Control”,
“Fast Cooling”, and “Energy-Saving Operation” to
the initial setting. Also, it will cancel the timer
mode.
It automatically switches between “Energy-Saving Operation
Mode” and “Normal Operation Mode” when the doors are not
opened and closed, such as at night and when the house is
unoccupied, to minimize the energy consumption.
Press button to start.
Alarm sound will announce the completion
Any panel switch can be pressed to stop the
alarm sound. (It automatically stops after 1
minute, if no panel switch was pressed.)
Setting range is minimum 1 minute up to
maximum 99 minutes with 1-minute increments.
To set the timer for 10-minute increments, hold
down the panel switch longer.
Smar
t
Tips f
or Using the Refrig
erator