OPERATING PROCEDURE
PHOTOS
52
Photo 5
Photo 4
Attach the partition for tank to the partition for chilled compart-
ment along the groove of it.
Attach the partition for chilled compartment together with the
partition for tank by inserting the convex parts of the parti-
tion for chilled compartment along the rails on the sides of the
refrigerator compartment. Slide the partition for tank along the
groove on the bottom of the refrigerator compartment while
paying attention to the position of the tabs.(See photo 5.)
(15) Disengage the tabs on the right and the left of the partition for
chilled compartment by lifting them up. (See photo 4.)
(16) Pull out the partition for chilled compartment together with the
partition for tank toward you, then lift them to remove them.
(See photo 4.)
(17) Pull out and remove the partition for tank along the groove of
the partition for chilled compartment.
Tab
Partition for tank
Tab
(16)
Tab
Partition for chilled compartment
Rail
Rail
Groove
Tabs
Partition for tank
Partition for chilled compartment
Note:
Partition for chilled compartment
Partition for tank
OAH162