Mitsubishi Electric melsec q03ud(E)cpu, Руководство пользователя

Страница: 23 / 220

21
CHAPTER 1 OVERVIEW
1
1.1 F
eature
s
(7) File transfer function (FTP) ( Page 139, CHAPTER 9)
Each of the files stored in the CPU module can be read or written from the interfacing device with the FTP client
function, and a large amount of data can be easily transferred.
(8) Remote password ( Page 163, CHAPTER 10)
Remote password setting can prevent unauthorized access from the outside and enhance the security of the
system.
(9) IP address change function ( Page 170, CHAPTER 11)
The IP address of the built-in Ethernet port can be changed from a GOT, not in the Built-in Ethernet Port Setting
of the PLC Parameter.
(10)IP packet transfer function ( Page 180, CHAPTER 12)
Communications can be performed with a device which supports the following IP addresses, which have been
specified via a CC-Link IE Controller Network module or CC-Link IE Field Network module, using a protocol such
as the FTP or HTTP via a built-in Ethernet port from an Ethernet device such as a personal computer.
• External devices on CC-Link IE Controller Network or CC-Link IE Field Network
• External devices on the Ethernet network, which are connected through the built-in Ethernet ports
(11)Reading/writing device data from/to the CPU module on another station by
specifying an IP address ( Page 182, CHAPTER 13)
Dedicated instructions allow the CPU module on the host station to read/write device data from/to the CPU
module on another station.
Some functions have been added by the upgrade of the serial numbers of CPU modules or the programming tool. For the list
of functions added by the upgrade, refer to Page 201, Appendix 3.