manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-R C, Руководство по программированию

Программируемый контроллер Mitsubishi Electric MELSEC iQ-R C обеспечивает высокую производительность и надежность в автоматизации производства. Вы можете бесплатно скачать Руководство по программированию на manualshive.com. Этот мануал поможет вам освоить программирование контроллера и использовать его на полную мощность.

Поделиться
Скачать
background image

4  ERROR CODE LIST

4.2  C Controller Module Dedicated Functions

181

4

-292

FEDCH

■

Program memory shutdown error

The shutdown processing of the program memory failed.

• Check if files in the program memory are being accessed.
• Check if all files in the program memory have been closed.

-293

FEDBH

■

Data memory shutdown error

The shutdown processing of the data memory failed.

• Check if files in the data memory are being accessed.
• Check if all files in the data memory have been closed.

-295

FED9H

■

Selected operation is being checked

The CCPU_SetDotMatrixLED function was executed while 
checking the selected operation.

Execute the CCPU_SetDotMatrixLED function after checking the 
operation.

-296

FED8H

■

Setting data size error

The setting data size is out of range.

Check the setting data size.

-297

FED7H

■

Input/output number, network number incorrect 

specification
An input/output number out of the range (other than 000H to 
FFFH or 3E0H to 3E3H) was specified.

Correct the argument of the function.

-298

FED6H

■

Input/output number, network number incorrect 

specification
An input/output number with no module was specified.

-299

FED5H

■

Input/output number, network number incorrect 

specification

• An input/output number of a module which does not 

support the function was specified.

• The dedicated instruction was specified with the specified 

module or mode.

Check the applicability of the dedicated function (such as the 
support status and executable mode) by referring to the manual for 
relevant modules.

-300

FED4H

■

Input/output number, network number incorrect 

specification
An input/output number of a module, that cannot be 
specified, was specified.

Correct the argument of the function.

-301

FED3H

■

Input/output number, network number incorrect 

specification
A network number out of the range (other than 1 to 239) 
was specified.

-302

FED2H

■

Input/output number, network number incorrect 

specification
A network number which does not exist was specified.

-303

FED1H

■

Input/output number, network number incorrect 

specification
An I/O module or intelligent function module controlled by 
other CPU modules was specified.

• Correct the argument of the function.
• Delete a module controlled by other CPU modules, which has 

been specified by the link direct device, from the program.

• Specify the network module controlled by the host CPU module 

with a link direct device.

-304

FED0H

■

Input/output number, network number incorrect 

specification
The target module cannot be identified with a function to 
specify an I/O module or intelligent function module.
(The character strings to specify the target module are 
incorrect.)

Correct the argument of the function.

-305

FECFH

■

Input/output number, network number incorrect 

specification
The specified I/O module or intelligent function module is in 
the state where it cannot execute the function.

The possible cause is a hardware failure of the I/O module or 
intelligent function module specified. Please consult your local 
Mitsubishi representative.

-306

FECEH

■

Device, buffer memory incorrect specification

The specified device exceeded the usable range.

Correct the argument of the function.

-307

FECDH

■

Device, buffer memory incorrect specification

A device that cannot be specified was specified.

-308

FECCH

■

Program fault

The specified argument structure is incorrect.

-309

FECBH

■

Program fault

The specified number of devices is incorrect.

-310

FECAH

■

Operation error

An unusable character string for a function is specified.

-311

FEC9H

■

Operation error

Data out of the specifiable range was entered.

Error code

Description

Corrective action

Decimal

Hexadec
imal

Содержание MELSEC iQ-R C

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-R C

KAR-TECH MICRO Installation And Operation Manual preview
MICRO
Бренд: KAR-TECH Страницы: 28
2iB SC10 Quick Start Manual preview
SC10
Бренд: 2iB Страницы: 5
2gig Technologies Go!Control Panel Installation & Programming Manual preview
Go!Control Panel
Бренд: 2gig Technologies Страницы: 78
Danfoss VLT series Quick Manual preview
VLT series
Бренд: Danfoss Страницы: 37
Daikin MicroTech II Operation And Maintenance Manual preview
MicroTech II
Бренд: Daikin Страницы: 44
Fancom 743 Installer Manual preview
743
Бренд: Fancom Страницы: 31
3M SST Manual preview
SST
Бренд: 3M Страницы: 90
NAPCO Gemini GEM-P9600 Installation Instructions Manual preview
Gemini GEM-P9600
Бренд: NAPCO Страницы: 6
NAPCO Gemini GEM-P816 Programming Instructions Manual preview
Gemini GEM-P816
Бренд: NAPCO Страницы: 56
NAPCO MFA6000 Operating & Installation Instructions Manual preview
MFA6000
Бренд: NAPCO Страницы: 48
NAPCO Magnum Alert 2600 Operating & Installation Instructions Manual preview
Magnum Alert 2600
Бренд: NAPCO Страницы: 68
DMX4ALL ArtNet-DMX Mux16 User Manual preview
ArtNet-DMX Mux16
Бренд: DMX4ALL Страницы: 21
Apricus Sentinel S4 Mounting, Connection, Operation preview
Sentinel S4
Бренд: Apricus Страницы: 32
Eaton XIOC-NET-DP-M Instruction Leaflet preview
XIOC-NET-DP-M
Бренд: Eaton Страницы: 2
Oriental motor ASD10A-K Operating Manual preview
ASD10A-K
Бренд: Oriental motor Страницы: 52
Opt OPT-DPA1024E-4 Manual preview
OPT-DPA1024E-4
Бренд: Opt Страницы: 40
Bartec PBTC-300 Operation And Installation Manual preview
PBTC-300
Бренд: Bartec Страницы: 52
Vixen Horns VXA7164B Installation Manual preview
VXA7164B
Бренд: Vixen Horns Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды