manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-R C, Руководство по программированию

Программируемый контроллер Mitsubishi Electric MELSEC iQ-R C обеспечивает высокую производительность и надежность в автоматизации производства. Вы можете бесплатно скачать Руководство по программированию на manualshive.com. Этот мануал поможет вам освоить программирование контроллера и использовать его на полную мощность.

Поделиться
Скачать
background image

192

APPX
Appendix 2  How to Replace an Existing Product

■

Device types for accessing CC-Link IE Field Network modules

*1 The own station direct link special relay (SB) has three device type definitions; DevSM, DevQSB, and DevLSB(0). Any of them can be 

specified for the same operation.

*2 The own station direct link special register (SW) has three device type definitions; DevSD, DevQSW, and DevLSW(0). Any of them can 

be specified for the same operation.

Alternative method

■

Refreshing device

■

Module access device

*1 For details on the buffer memory address to which link devices are assigned, refer to the manual for the network module to be accessed.

■

CCPU_ReadLinkDevice/CCPU_WriteLinkDevice

 • Access the own station link device of a network module by using the CCPU_ReadLinkDevice/CCPU_WriteLinkDevice 

function. For details, refer to the relevant functions.

Page 90 CCPU_ReadLinkDevice,Page 118 CCPU_WriteLinkDevice

Device type deleted from R12CCPU-V

Alternative method

Device

Device name specification

Own station remote input

RX

DevLX(0)

The area (device) corresponding to the device type deleted from 
R12CCPU-V can be accessed with either of the methods below.

Page 192 Refreshing device, The access target is a network 

module on the own station.

Page 192 Module access device, The access target is a network 

module on the own station.

Page 192 CCPU_ReadLinkDevice/CCPU_WriteLinkDevice

Own station remote output

RY

DevLY(0)

Own station remote register (for 
sending)

RWw

DevLW(0)

Own station remote register (for 
receiving)

RWr

Own station direct link special relay

*1

SB

DevSM, DevQSB, DevLSB(0)

The area (device) corresponding to the device type deleted from 
R12CCPU-V can be accessed with either of the methods below.

Page 192 Refreshing device, The access target is a network 

module on the own station.

Page 192 CCPU_ReadLinkDevice/CCPU_WriteLinkDevice

Own station direct link special 
register

*2

SW

DevSD, DevQSW, DevLSW(0)

Buffer memory

DevSPB

The area (device) corresponding to the device type deleted from 
R12CCPU-V can be accessed with the following method.

Page 192 Module access device, The access target is a network 

module on the own station.

Access target

Alternative method

The access target is a network module on the own 
station.

Configure the refresh setting so that a device of C Controller module, M, B, D, W, or ZR is refreshed by 
a link device of a network module.

Use the MELSEC data link functions to access a device of C Controller module, M, B, D, W or ZR.

The access target is a network module on the other 
station.

Configure the refresh setting for CPU module on the other station so that a device of C Controller 
module on the other station is refreshed by a link device of a network module.

Specify the other station to the network number and station number in the MELSEC data link functions 
to access a device of CPU module on the other station.

Access target

Alternative method

The access target is a network module on the own 
station.

Open a communication line by specifying 'bus interface' to the channel in the mdOpen function.

Specify the module access device (DevSPG) to the device type in the MELSEC data link functions, and 
access the area to which link devices are assigned

*1

 in the buffer memory of a network module.

The access target is a network module on the other 
station.

Open a communication line by specifying the channel name corresponding to each network to the 
channel in the mdOpen function.

Specify the other station to the network number and station number in the MELSEC data link functions.

Specify the module access device (DevSPG) to the device type in the MELSEC data link functions, and 
access the area to which link devices are assigned

*1

 in the buffer memory of a network module.

Содержание MELSEC iQ-R C

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-R C

zipwake S Series Troubleshooting Manual preview
S Series
Бренд: zipwake Страницы: 12
Watts 7 Series Installation, Maintenance & Repair preview
7 Series
Бренд: Watts Страницы: 2
jbc UCR Instruction Manual preview
UCR
Бренд: jbc Страницы: 12
IBM 1620 Manual Of Instruction preview
1620
Бренд: IBM Страницы: 12
K&K M9700 Installation Instructions Manual preview
M9700
Бренд: K&K Страницы: 10
Danfoss VLT AutomationDrive FC 302 Installation Manual preview
VLT AutomationDrive FC 302
Бренд: Danfoss Страницы: 128
Danfoss VLT DriveMotor FCP 106 Installation Instructions preview
VLT DriveMotor FCP 106
Бренд: Danfoss Страницы: 4
Danfoss VLT AQUA Drive FC 202 Installation Manual preview
VLT AQUA Drive FC 202
Бренд: Danfoss Страницы: 124
Danfoss AME 55 Installation Manual preview
AME 55
Бренд: Danfoss Страницы: 2
Danfoss AME 110 NL Datasheet preview
AME 110 NL
Бренд: Danfoss Страницы: 8
Danfoss AK-CH 650 User Manual preview
AK-CH 650
Бренд: Danfoss Страницы: 114
Danfoss TS715Si Installation Manual preview
TS715Si
Бренд: Danfoss Страницы: 16
Danfoss AME 438 SU Installation Manual preview
AME 438 SU
Бренд: Danfoss Страницы: 24
Danfoss AK-LM 330 User Manual preview
AK-LM 330
Бренд: Danfoss Страницы: 8
Danfoss ECL Comfort 296 Operating Manual preview
ECL Comfort 296
Бренд: Danfoss Страницы: 159
Danfoss VLT AutomationDrive FC 301 Operating Manual preview
VLT AutomationDrive FC 301
Бренд: Danfoss Страницы: 78
Danfoss AME 335 Installation Manual preview
AME 335
Бренд: Danfoss Страницы: 20
Danfoss ECL Comfort 210 User Manual preview
ECL Comfort 210
Бренд: Danfoss Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды