manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-R C, Руководство по программированию

Программируемый контроллер Mitsubishi Electric MELSEC iQ-R C обеспечивает высокую производительность и надежность в автоматизации производства. Вы можете бесплатно скачать Руководство по программированию на manualshive.com. Этот мануал поможет вам освоить программирование контроллера и использовать его на полную мощность.

Поделиться
Скачать
background image

180

4  ERROR CODE LIST
4.2  C Controller Module Dedicated Functions

-257

FEFFH

■

Interrupt event type specification error

The value specified to the interrupt event type is out of 
range.

Check the specified value.

-258

FEFEH

■

Interrupt pointer number specification error

The value specified as the interrupt pointer number is out of 
range.

Check the specified value.

-259

FEFDH

■

Interrupt service routine unregistered error

• The processing was not registered when enabling the 

processing corresponding to an event (interrupt).

• The specified CPU number is incorrect.

• Register the processing for the event (interrupt) and perform the 

operation again.

• Check the specified CPU number.

-260

FEFCH

■

Drive mount error

■

Drive unmount error

The mount processing or unmount processing of the drive 
failed.

• Retry.
• Check if the drive is damaged.
• Replace the drive.

-263

FEF9H

■

Caller flag error

The value specified to the caller flag is out of range.

Review the specified value, and specify a value within the range.

-264

FEF8H

■

Pointer error

The address of the specified pointer is incorrect.

Check the address of the specified pointer.

-265

FEF7H

■

Target system specification error

The value specified in the target system is out of range.

Check the specified value.

-266

FEF6H

■

WDT start error

The user WDT is being started.

Check the user WDT settings.

-267

FEF5H

■

Authentication error

The password is incorrect.

Check the specified password.

-268

FEF4H

■

Security error

The setting content of the security function is incorrect.

Check the settings of the specified security function.

-269

FEF3H

■

Network number error

The specified network number is out of range.

Check the specified network number.

-270

FEF2H

■

Channel number error

The specified channel number is out of range.

Check the specified channel number.

-271

FEF1H

■

Target station number error

The specified target station number is out of range.

Check the specified target station number.

-279

FEE9H

■

File specification error

• The specified file does not exist.
• A file with the same name already exists. (The existing file 

is overwrite-protected.)

• A file cannot be created in the specified path, or the 

specified path does not exist.

• Check the specified file.
• Check if the existing file is overwrite-protected.
• Check if no files exist with the same name as the file to be 

created.

-280

FEE8H

■

File access error

The specified file is in use.

Check if the specified file is in use.

-281

FEE7H

■

Instruction name error

The instruction name is incorrect.

Check the specified instruction name.

-282

FEE6H

■

Mode information error

The specified mode information is out of range.

Check the specified mode information.

-283

FEE5H

■

Operation selection mode

The specified operation selection mode is out of range.

Check the specified operation selection mode.

-288

FEE0H

■

Individual identification information read error

Reading individual identification information failed.

• Check if the C Controller module is running normally.
• Reset the C Controller module, or turn the power OFF and ON.

-289

FEDFH

■

Dot matrix LED mode selection error

An operation other than "USER" was selected by using the 
CCPU_SetOpSelectMode function or with the MODE/
SELECT switch.

Select "USER" by using the CCPU_SetOpSelectMode function or 
with the MODE/SELECT switch.

-290

FEDEH

■

MODE is being selected by switch operation

The CCPU_SetOpSelectMode function or the 
CCPU_SetDotMatrixLED function was executed while an 
operation was being selected with the MODE/SELECT 
switch.

Execute the function after selecting an operation.

-291

FEDDH

■

Fixed cycle communication area unreserved error

An attempt was made to access a CPU module in which 
fixed cycle communication area is not reserved.

Use the fixed cycle communication function in the multiple CPU 
setting of system parameter, and check if 1K word or more is set for 
the fixed cycle communication area.

Error code

Description

Corrective action

Decimal

Hexadec
imal

Содержание MELSEC iQ-R C

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-R C

T-Verter E2 Series Operating Manual preview
E2 Series
Бренд: T-Verter Страницы: 121
Happy 1050 Installation & Use Instructions preview
1050
Бренд: Happy Страницы: 10
QUAD 33 Instruction Book preview
33
Бренд: QUAD Страницы: 16
Radarcan R-200 User Manual preview
R-200
Бренд: Radarcan Страницы: 40
KAR-TECH MICRO Installation And Operation Manual preview
MICRO
Бренд: KAR-TECH Страницы: 28
2iB SC10 Quick Start Manual preview
SC10
Бренд: 2iB Страницы: 5
2gig Technologies Go!Control Panel Installation & Programming Manual preview
Go!Control Panel
Бренд: 2gig Technologies Страницы: 78
GAI-Tronics Elemec3 013-02-0095-002 Manual preview
Elemec3 013-02-0095-002
Бренд: GAI-Tronics Страницы: 12
GEA VARIVENT D Series Operating Instruction preview
VARIVENT D Series
Бренд: GEA Страницы: 78
GEA T-smart 7 Operating Instruction preview
T-smart 7
Бренд: GEA Страницы: 96
GEA T.VIS P-15 Operating Instruction preview
T.VIS P-15
Бренд: GEA Страницы: 66
UNI EV Series Operating And Mounting Manual preview
EV Series
Бренд: UNI Страницы: 21
OBSIDIAN CONTROL SYSTEMS NX4 Installation Manual preview
NX4
Бренд: OBSIDIAN CONTROL SYSTEMS Страницы: 13
IBM ServeRAID-MR10is User Manual preview
ServeRAID-MR10is
Бренд: IBM Страницы: 94
IBM ServeRAID-4 Ultra160 Series Installation Instructions Manual preview
ServeRAID-4 Ultra160 Series
Бренд: IBM Страницы: 20
IBM 8271 Nways Ethernet LAN Switch Manual preview
8271 Nways Ethernet LAN Switch
Бренд: IBM Страницы: 6
IBM 3174 Introduction Manual preview
3174
Бренд: IBM Страницы: 86
IBM 3745 Series Console Setup Manual preview
3745 Series
Бренд: IBM Страницы: 205

Бренды по названию

Популярные бренды

Загрузить еще бренды