manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-R C, Руководство по программированию

Программируемый контроллер Mitsubishi Electric MELSEC iQ-R C обеспечивает высокую производительность и надежность в автоматизации производства. Вы можете бесплатно скачать Руководство по программированию на manualshive.com. Этот мануал поможет вам освоить программирование контроллера и использовать его на полную мощность.

Поделиться
Скачать
background image

38

1  COMMON ITEMS
1.3  MELSEC Data Link Functions

Network number and station number

■

Network number and station number for MELSEC data link functions (excluding the 

mdControl function and the mdTypeRead function)

Network numbers and station numbers to be specified to MELSEC data link functions are as follows:
To specify station numbers for the mdControl function and mdTypeRead function, refer to "Network number and station 
number for MELSEC data link functions (the mdControl function and the mdTypeRead function)".

*1 Logical station numbers are logical numbers which specifies "station number" in a user program (MELSEC data link functions).

Logical station numbers are used to access from an applicable module (channel number) to the other station CPU (other CPU of a 
multiple CPU system).
To access directly to a CPU module which controls other stations on MELSECNET/10 network, MELSECNET/H network, CC-Link IE 
Controller Network, and CC-Link IE Field Network, the logical station number is not required to be set. Use the station numbers of 
MELSECNET/10 network, MELSECNET/H network, CC-Link IE Controller Network, and CC-Link IE Field Network.
Also, for direct access to CC-Link other stations (station number 0 to 63) or the CPU module which controls CC-Link other stations, 
setting of the local station number is not required. Specify or use the station number of CC-Link.

*2 The station number 64 cannot be specified for CC-Link communication.
*3 Communication to C Controller module (own station) by using the MELSEC data link functions is possible; however, it may take longer 

to execute the functions compared to the C Controller module dedicated functions. Use the C Controller module dedicated functions to 
create a user program in which performance should be ensured (such as control program).

*4 The group number and all stations specification is valid when the SEND function (mdSendEX (message send function)) with 'no arrival 

confirmation' specification is used.

*5 The group number can be specified when CC-Link IE Controller Network and MELSECNET/H network are used.
*6 125 (7DH) is valid when CC-Link IE Field Network master station (station number 0) is specified by using the SEND/RECV function 

(mdSendEx (message send function) or mdReceiveEX (message receive function)). To access a master operating station (a station that 
is operating as the master station when the submaster function is used), specify the station number from 1 (1H) to 120 (78H).

*7 When '0 (0H)' or '125 (7DH)' is specified for the station number, a specified control station of the network, which is specified to the 

network number, is accessed. To access the current control station (a station that is actually operating as the control station), specify the 
station number from 1 (1H) to 120 (78H).

Communication

Specification method

Network number

Station number

Bus interface

Own station

0 (0H)

255 (FFH)

*3

Other station

1 (CPU No.1), 2 (CPU No.2), 3 (CPU No.3), 
and 4 (CPU No.4)

CC-Link IE Controller 
Network

Own station

0 (0H)

255 (FFH)

Other station

Station number

1 (1H) to 239 (EFH)

1 (1H) to 120 (78H)
0 (0H)

*7

, 125 (7DH)

*7

Group number 1 to 32

*4,*5

129 (81H) to 160 (A0H)

All stations

*4

240 (F0H)

Logical station number

*1

0 (0H)

65 (41H) to 239 (EFH)

CC-Link IE Field 
Network

Own station

0 (0H)

255 (FFH)

Other station

Station number

1 (1H) to 239 (EFH)

0 (0H) to 120 (78H), 125 (7DH)

*6

All stations

*4

240 (F0H)

Logical station number

*1

0 (0H)

65 (41H) to 239 (EFH)

MELSECNET/H 
network

Own station

0 (0H)

255 (FFH)

Other station

Station number

1 (1H) to 239 (EFH)

1 (1H) to 64 (40H)
0 (0H)

*7

, 125 (7DH)

*7

Group number 1 to 32

*4,*5

129 (81H) to 160 (A0H)

All stations

*4

240 (F0H)

Logical station number

*1

0 (0H)

65 (41H) to 239 (EFH)

CC-Link

Other station

0 (0H)

0(0H) to 63(3FH)

*2

Logical station number

*1

65 (41H) to 239 (EFH)

Содержание MELSEC iQ-R C

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-R C

Gardena 4040 Operating Instructions Manual preview
4040
Бренд: Gardena Страницы: 100
IBM 1710 Manual preview
1710
Бренд: IBM Страницы: 72
2gig Technologies GC3 Manual preview
GC3
Бренд: 2gig Technologies Страницы: 4
2gig Technologies GC3 Quick Start Manual preview
GC3
Бренд: 2gig Technologies Страницы: 2
G1SLE MK2 Alignment Manual preview
MK2
Бренд: G1SLE Страницы: 2
GARAN EWS-102 Calibration & Setup preview
EWS-102
Бренд: GARAN Страницы: 8
Gamma Vacuum SPCe User Manual preview
SPCe
Бренд: Gamma Vacuum Страницы: 25
Gamma DIGITEL MPCq User Manual preview
DIGITEL MPCq
Бренд: Gamma Страницы: 28
IBM 3746-900 Installation Manual preview
3746-900
Бренд: IBM Страницы: 276
IBM 4769 Installation Manual preview
4769
Бренд: IBM Страницы: 32
IBM 3745 Series Connection And Integration Manual preview
3745 Series
Бренд: IBM Страницы: 157
hager ZZ45WAN2PP Mounting Instructions preview
ZZ45WAN2PP
Бренд: hager Страницы: 2
hager TYB601A Quick Start Manual preview
TYB601A
Бренд: hager Страницы: 4
Raynor Smart Control Panel 880RGD Quick Manual preview
Smart Control Panel 880RGD
Бренд: Raynor Страницы: 4
Viking VC-1000 Technical Practice preview
VC-1000
Бренд: Viking Страницы: 4
Vag GA Figure 220-D Installation, Operation And Maintenance Manual preview
GA Figure 220-D
Бренд: Vag Страницы: 6
Acumen Model L Operating Instructions Manual preview
Model L
Бренд: Acumen Страницы: 6
PCB Piezotronics 482B06 Installation And Operating Manual preview
482B06
Бренд: PCB Piezotronics Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды