manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-F FX5, Руководство по программированию

Программируйте и контролируйте Mitsubishi Electric MELSEC iQ-F FX5 с помощью нашего бесплатного руководства по программированию. Скачайте его с нашего сайта. Откройте новые возможности для вашего бизнеса с помощью этого удобного и надежного продукта.

Поделиться
Скачать
background image

15  EXTERNAL DEVICE COMMUNICATION INSTRUCTION

15.4  Predefined Protocol Support Function Instruction

837

15

■

Control data

Device

Item

Description

Setting range

Set by

*1

(s)+0

Completion status

The completion status is stored upon completion of the instruction.
When two or more protocols are executed, the execution result of the protocol 
executed last is stored.

• 0: Normal completion
• Other than 0: Error completion (error code)

System

(s)+1

Resulting number of 
executed protocols

The number of protocols executed by the SP.ECPRTCL instruction is stored. 
Any protocol where an error occurred is also included in the execution number. If 
the setting of setting data or control data contains an error, "0" is stored.

0, 1 to 8

(s)+2

Execution protocol 
number 1

Specify the number of the protocol to be executed first.

1 to 64

User

(s)+3

Execution protocol 
number 2

Specify the number of the protocol to be executed second.

0, 1 to 64

(s)+4

Execution protocol 
number 3

Specify the number of the protocol to be executed third.

0, 1 to 64

(s)+5

Execution protocol 
number 4

Specify the number of the protocol to be executed fourth.

0, 1 to 64

(s)+6

Execution protocol 
number 5

Specify the number of the protocol to be executed fifth.

0, 1 to 64

(s)+7

Execution protocol 
number 6

Specify the number of the protocol to be executed sixth.

0, 1 to 64

(s)+8

Execution protocol 
number 7

Specify the number of the protocol to be executed seventh.

0, 1 to 64

(s)+9

Execution protocol 
number 8

Specify the number of the protocol to be executed eighth.

0, 1 to 64

(s)+10

Collation match
Receive packet 
number 1

If receiving is included in the communication type of the protocol that has been 
executed first, the receive packet number successful in collation match is stored. 
If the communication type is "receive only", "0" is stored. If an error occurs 
during execution of the first protocol, "0" is stored.

0, 1 to 16

System

(s)+11

Collation match
Receive packet 
number 2

If receiving is included in the communication type of the protocol that has been 
executed second, the receive packet number successful in collation match is 
stored. If the communication type is "receive only", "0" is stored. If an error 
occurs during execution of the second protocol, "0" is stored. If the number of 
protocols executed is less than 2, "0" is stored.

0, 1 to 16

(s)+12

Collation match
Receive packet 
number 3

If receiving is included in the communication type of the protocol that has been 
executed third, the receive packet number successful in collation match is 
stored. If the communication type is "receive only", "0" is stored. If an error 
occurs during execution of the third protocol, "0" is stored. If the number of 
protocols executed is less than 3, "0" is stored.

0, 1 to 16

(s)+13

Collation match
Receive packet 
number 4

If receiving is included in the communication type of the protocol that has been 
executed fourth, the receive packet number successful in collation match is 
stored. If the communication type is "receive only", "0" is stored. If an error 
occurs during execution of the fourth protocol, "0" is stored. If the number of 
protocols executed is less than 4, "0" is stored.

0, 1 to 16

(s)+14

Collation match
Receive packet 
number 5

If receiving is included in the communication type of the protocol that has been 
executed fifth, the receive packet number successful in collation match is stored. 
If the communication type is "receive only", "0" is stored. If an error occurs 
during execution of the fifth protocol, "0" is stored. If the number of protocols 
executed is less than 5, "0" is stored.

0, 1 to 16

(s)+15

Collation match
Receive packet 
number 6

If receiving is included in the communication type of the protocol that has been 
executed sixth, the receive packet number successful in collation match is 
stored. If the communication type is "receive only", "0" is stored. If an error 
occurs during execution of the sixth protocol, "0" is stored. If the number of 
protocols executed is less than 6, "0" is stored.

0, 1 to 16

(s)+16

Collation match
Receive packet 
number 7

If receiving is included in the communication type of the protocol that has been 
executed seventh, the receive packet number successful in collation match is 
stored. If the communication type is "receive only", "0" is stored. If an error 
occurs during execution of the seventh protocol, "0" is stored. If the number of 
protocols executed is less than 7, "0" is stored.

0, 1 to 16

(s)+17

Collation match
Receive packet 
number 8

If receiving is included in the communication type of the protocol that has been 
executed eighth, the receive packet number successful in collation match is 
stored. If the communication type is "receive only", "0" is stored. If an error 
occurs during execution of the eighth protocol, "0" is stored. If the number of 
protocols executed is less than 8, "0" is stored.

0, 1 to 16

Содержание MELSEC iQ-F FX5

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-F FX5

Vacon 20 Quick Manual preview
20
Бренд: Vacon Страницы: 62
Abicor Binzel EWR Quick Install Instructions preview
EWR
Бренд: Abicor Binzel Страницы: 8
Abus FUMO50110 Quick Manual preview
FUMO50110
Бренд: Abus Страницы: 12
GAUGEMASTER COMBI Manual preview
COMBI
Бренд: GAUGEMASTER Страницы: 2
EasyIO FC Series Firmware Upgrade User Manual preview
FC Series
Бренд: EasyIO Страницы: 19
Zero 88 FLX Copying Manual preview
FLX
Бренд: Zero 88 Страницы: 2
Zenit FLX Use And Maintenance Instructions preview
FLX
Бренд: Zenit Страницы: 24
PAC 212 Install Manual preview
212
Бренд: PAC Страницы: 17
Eaton ELC-COENETM Instruction Sheet preview
ELC-COENETM
Бренд: Eaton Страницы: 6
Eaton InsulGard Installation And Start Up Manualline preview
InsulGard
Бренд: Eaton Страницы: 35
Eaton xStorage Home User Interface Manual preview
xStorage Home
Бренд: Eaton Страницы: 18
Eaton DF6000 Application Manual preview
DF6000
Бренд: Eaton Страницы: 73
Eaton DALI Installation Manual preview
DALI
Бренд: Eaton Страницы: 4
Eaton Cutler-Hammer IQ DP-4000 Installation, Operation And Maintenance Instructions preview
Cutler-Hammer IQ DP-4000
Бренд: Eaton Страницы: 87
Eaton Char-Lynn Manual preview
Char-Lynn
Бренд: Eaton Страницы: 14
Eaton BiWire Flexi Installation Manual preview
BiWire Flexi
Бренд: Eaton Страницы: 36
Häfele 633.03.298 Quick Start Manual preview
633.03.298
Бренд: Häfele Страницы: 2
Häfele 633.03.298 Operating Instructions Manual preview
633.03.298
Бренд: Häfele Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды