Mitsubishi Electric MELFA RH-3CRH Series, Инструкция по эксплуатации

Страница: 78 / 102

5-66 About Overhaul
5 Maintenance and Inspection
5.4 About Overhaul
Robots which have been in operation for an extended period of time can suffer from wear and other forms of
deterioration. In regard to such robots, we define overhaul as an operation to replace parts running out of
specified service life or other parts which have been damaged, so that the robots may be put back in shape
for continued use. As a rule of thumb, it is recommended that overhaul be carried out before the total
amount of servo-on time reaches the specified time (24,000 hours for the robot arm and 36,000 hours for
the controller). (See
Fig. 5-9 .) However, the degree of the equipment's wear and deterioration presumably
varies depending on their operating conditions. Especially for operation with high load and frequency, the
maintenance cycle may be shorter. For details on the part selection for replacement and the timing of
overhaul, contact your dealer.
Fig.5-9:Periodic inspection/overhaul periods
Shipment
F
ail
ure rate
λ
Predetermined time
If overhaul is performed
Servo-on time
If overhaul is not performed
Periodic inspection
Over-
haul