Mitsubishi Electric MELDAS MDS-R Series, Технические характеристики и инструкция по эксплуатации

Страница: 90 / 285

6. Installation
6 - 4
(3) When installing the servomotor horizontally, set the power cable and detector cable to face downward.
When installing vertically or with an inclination, provide a cable trap.
Cable trap
When installed horizontally When installed vertically
CAUTION
1. The servomotors, including those having IP67 specifications, do not have a
completely waterproof (oil-proof) structure. Do not allow oil or water to
constantly contact the motor, enter the motor, or accumulate on the motor. Oil
can also enter the motor through cutting chip accumulation, so be careful of
this also.
2. When the motor is installed facing upwards, take measures on the machine
side so that gear oil, etc., does not flow onto the motor shaft.
3. Do not remove the detector from the motor. (The detector installation screw is
treated for sealing.)
(4) Do not use the unit with the cable submerged in oil or
water.
(Refer to right drawing.)
(5) Make sure that oil and water do not flow along the cable
into the motor or detector. (Refer to right drawing.)
Cover
<Fault> Capillary tube Phenomenon
Servomotor
Oil or water pool
Cover
<Fault> Respiration
Servomotor