Mitsubishi Electric MELDAS MDS-B-SVJ2 Series, Технические характеристики и инструкция по эксплуатации

Страница: 288 / 297

Printing
date
Specification
manual No.
Revision details
Feb., 2000 BNP-B3937E
(continued) Section 2-4-14 Corrected detector cable connector type. Added detector
connector type.
Corrected detector connector pin 9 name (LG
→
SD).
Section 2-4-16 Corrected detector cable connector type. Added detector
connector type.
Corrected detector connector pin 9 name (LG
→
SD).
Section 2-4-17 Added HC-MF
∗∗
S15 (IP65 specifications) connection drawing.
Section 2-5-1 Changed converter type description to MDS-B-CVE.
Added cautions for (2) MDS-B-CVE-450 and above.
Section 3-2-2 Changed explanatory drawing.
Section 3-2-4 Added HC-SF and HC-RF motor taper shaft specifications.
Corrected HC-MF23 tolerable shaft load.
Section 3-2-5 Added items, and changed explanatory drawing. Added
cautions. Added HC-MF motor IP65 specifications.
Section 5-1-2 Added D/A output function channels 8 and 28.
Section 5-3-1 (1) Corrected HC motor maximum current command values
(table values).
Revised (4) Settling time explanatory drawing.
Section 5-3-2 Added notch filter 2.
Section 5-3-3 Added explanation on (4) Voltage non-sensitive compensation.
Added point for (4) Disturbance torque. Revised parameter
explanation (SV037).
Section 5-3-4 Added point for (1) Lost motion compensation.
Revised (2) parameter explanation (SV032). Revised the points.
Section 5-4-2 Added cautions.
Section 5-5 Added collision detection.
Section 5-6 Added parameters (SV034, 35, 45, 59, 60).
Revised parameter explanations (SV032, 37). Revised
parameter setting range (SV041).
Section 6-4 Added HC-MF
∗∗
S15 (IP65 specifications) detector cable,
connector set and power supply connector.
Section 6-4-5 Changed (3) and (4) general-purpose motor detector cable
manufacturing connection drawing to 4-wire type
communication.
Section 7-1 Added UL Standards compliance notations to the wire sizes.
Added crimp terminal and tool type.
Section 7-2 Changed converter series to MDS-B-CVE.
Section 7-3 Changed converter series to MDS-B-CVE.
Section 7-4-1 Corrected circuit protector rated current.
Section 7-4-3 Revised surge absorber (Matsushita Electric Industrial Co., Ltd.)
to the new series type.
Section 8-3-1 Added explanation for alarm 31. Added explanations for alarms
58, 59 and 5A.
Section 8-3-3 Added explanations for alarms 58, 59 and 5A.
Section 9-4-2 Revised Fig. 9-5.
Section 10-1-2 Added terminal block screw size description.
Section 10-2-1 Changed HC motor shaft conversion recommended load inertia
rate specifications.
Section 10-2-3 Added outline dimension drawing for the HC-SF and HC-RF
motor taper shaft specifications.
Divided HC-MF motor outline drawing into three capacities.
Added HC-MF
∗∗
S15 (IP65 specifications). Changed tightening
torque unit (kgf·cm
→
N·m). Added precautions.
July, 2002 BNP-B3937F Software version C4 compatible
Added HC
†
-A47, HC
†
R-A47 motors.