Mitsubishi Electric ME96NSR Скачать руководство пользователя страница 39

Страница: 39 / 70

6. Operation

6.4 Maximum Value and Minimum Value Display

Instantaneous value display

Maximum value and

minimum value display

MAX/MIN

Note 1: In the maximum value and minimum value display, bar graph is lit only between the maximum value and the minimum

value.

Note 2: When the screen shifts to the maximum value and minimum value display, the followings are displayed from head in the

order below.
A A

DA DA

V W var VA PF Hz HI HI

However, item that are not set for display are not displayed.

Note 3: As for harmonic, only the following maximum values are displayed.

Harmonic current total effective value, 1st, 3rd, 5th, 7th, 9th, 11th, 13th current effective values
Harmonic voltage total distortion ratio, 1st voltage effective value, 3rd, 5th, 7th, 9th, 11th, 13th containing ratio

Note 1: The maximum values and minimum values of being not displayed are not reset.
Note 2: As for harmonic, all degrees are reset.

RESET

When

RESET

and

are pressed simultaneously for 2 seconds or more, all the maximum values and minimum

values are reset.

●

Delay time of max/min value

If max/min value doesn’t continue for a long time since delay time, it doesn’t update it.

(Delay time is set by set-up menu 5 “Alarm delay time, delay time of max/min value”.)

Please set the delay time when you do not want to make the maximum value updated in the condition of becom-

ing a value with excessive only way short time such as starting currents of the motor.

Note 1: When delay time is set, the value whose value of middle stage is larger than the maximum value might be displayed until delay time passes.

Note 2: A similar phenomenon might happen in the demand current, harmonics current, harmonics voltage.

The maximum values and the minimum values are displayed.

●

Display of maximum value and minimum value

When

MAX/MIN

is pressed, the display is changed into the maximum value and minimum value display. And

when

MAX/MIN

is pressed, the display changes back to the instantaneous value display.

Display change example (display pattern : P01)

●

Reset the maximum value and minimum value

When

RESET

is pressed for 2 seconds or more, the displayed maximum value and minimum value can be reset.

“Reset” means that maximum/minimum value turns into the save value as the instantaneous value.

Содержание ME96NSR







































































Результаты поиска

Содержание ME96NSR

Отзывы:

Похожие инструкции для ME96NSR

Бренды по названию

Популярные бренды

Mitsubishi Electric ME96NSR, Руководство пользователя

Результаты поиска

Содержание ME96NSR

Отзывы:

Похожие инструкции для ME96NSR

Бренды по названию

Популярные бренды