Mitsubishi Electric ME96NSR, Руководство пользователя

Страница: 18 / 70

18
DISPLAY SET
6
CC-Link station
number
6
Set the CC-Link station number.
In the case of ModBus, this display does not apper.
Settable addresses: 1 to 64
8
Communication
module reset
8
Set the communication module reset.
In the case of ModBus, this display does not apper.
DISPLAY SET
7
CC-Link baud rates
7
Set the CC-Link baud rates.
In the case of ModBus, this display does not apper.
Settable baud rates:
Set it ON.
on oFF
Note: When it is not set to ON, changed station number and baud rate do not
become valid.
9
Digital input reset
9
Set the digital input(DI) reset method.
Without digital input, this display does not apper.
DISPLAY SET
HoLd: Manual method Auto: Automatic method
Note: When selected the manual method(HoLd), input state is kept until the
cancel operation by the hand. For the method of the cancel operation, refer
to page 44.
SET
0: 156k
1: 625k
2: 2.5M
3: 5M
4: 10M
Set-up menu
According to the set-up diagram (page 13), save the changed
contents or continue to the other set-up menu.
+ –
,
+ –
,
+ –
,
+ –
,
+ –
,
4. Set-up
Set-up Menu 2
4.3 Communication, Cancel of Digital Input Set-up