Mitsubishi Electric MAC-333IF-E, Техническое руководство

Страница: 27 / 32

25
MAC-333IF-E
5.5 ON/OFF CONTROL BY MAIN POWER SOURCE
· ON/OFF control by main power source
Turning on the main power source turns on the air conditioner.
SW No. Dip switch Operating details
SW500-2
· OFF:
· The air conditioner remains off when the main power is turned on.
* When the “AUTO restart function” is enabled on the air conditioner, set this function to
OFF on MAC-333IF-E, and the air conditioner operates according to the setting on
the air conditioner.
· ON :
· The air conditioner turns on by its main power source being turned on.
Function
summary
The air conditioner turns on by its main power source being turned on.
System
configuration
MAC333IF-E
CN560
Indoor control board in the room air conditioner
CN105 (CN92)
5
Connecting cable that comes with MAC-333IF-E
SYSTEM CONTROL interface
Behavior The air conditioner turns on by its main power source being turned on.
Switch setting
Note
· The ON/OFF control by main power source is disabled when an indoor unit is connected to the MXZ-series outdoor unit.
· Set up the system to prevent two or more room air conditioners from recovering simultaneously when starting the air conditioners using
the ON/OFF control by main power source. (To avoid inrush current, start the operation sequentially)
· This function cannot be used when the “Auto restart function” is enabled on the room air conditioner.
· When using the air conditioner for the first time, set it to the desired operational status with the paired remote controller.
(Run the air conditioner for 30 seconds or more.) The following operational status information will be stored: ON/OFF, operation mode,
set temperature, air direction, and air speed.
· When using the air conditioner that was not used for a long time, it is recommended to set it to the desired operational status again
with the remote controller.
ON
1 2 3 4 5 6 7 8
OFF
OFF
ON