Mitsubishi Electric FR-V5NS, Инструкция по эксплуатации

Страница: 32 / 33

26
ALARM INDICATION DEFINITIONS AND CORRECTIVE ACTIONS
(2) Alarm
When the protective function is activated, the output is not shut off.
Operation panel
indication
E. 9 FR-PU04V Fault 9
Name Initial communication alarm
Description
If any of the values set in the initial communication parameters is outside the setting range at the time of ini-
tial communication of the motion controller and inverter (FR-V5NS), the alarm is displayed and initial com-
munication is stopped.
Check point
Check that the initial communication parameter values are set within the setting ranges.
Corrective action Refer to page 13 and check the initial communication parameter values.
Operation panel
indication
CF FR-PU04V CF
Name Initial communication waiting status
Description
If SSCNET communication is disabled due to the fault of the communication cable or the power-off of the
communication equipment (personal computer) or motion controller, the output is shut off and the alarm is
displayed.
The operation to be performed at occurrence of communication shutoff can be selected using Pr. 499 "action
selection at SSCNET communication interruption".
Check point
• Check the communication cable for a fault.
• Check that the communication equipment (personal computer) and motion controller have not been pow-
ered off.
• Check that the setting of Pr. 499 "action selection at SSCNET communication interruption" is correct.
Corrective action
• Change the communication cable.
• Power on the communication equipment (personal computer) and motion controller.
• Check the Pr. 499 "action selection at SSCNET communication interruption" setting.