manualshive.com logo in svg

Mitsubishi Electric DLP NW30U, Руководство пользователя

Поделиться
Скачать
Mitsubishi Electric DLP NW30U Скачать руководство пользователя страница 64

EN-64

Connection

For details of the connection, see “LAN control UTILITY operation manual” in the CD-ROM.

When STANDBY MODE of the INSTALLATION menu of the projector is set to LOW, the network function is 
disabled. To enable the network function, set STANDBY MODE to STANDARD or LAN. (See page 28.)

Confi gure the initial network settings fi rst. 
You can confi gure the initial settings using the projector menu (see pages 40 to 45) or ProjectorView or 
ProjectorView. For details of ProjectorView and ProjectorView, see “LAN control UTILITY operation manual” in 
the CD-ROM.

Using the User Manual

The User Manual for LAN Control Utility is prepared in the Portable Document Format (PDF) in the CD-ROM. 

Opening the User Manual:

1.  Load the CD-ROM into the CD-ROM drive.

2.  Open CD-ROM “PROJECTOR.”

3.  Double-click on “MANUAL_LAN.HTML” within the CD-ROM. A language selection list for the User Manual will be 

displayed.

4.  Move the mouse pointer to the desired language and click. 

PJLink™ supported commands

The table below shows commands to control the projector using the PJLink™ protocol.

Command

Description

Remark (Parameter)

POWR

Power control

0 = Standby
1 = Power on

POWR ?

Inquiry about the power state

0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up

INPT

Input switching

11 = COMPUTER1 

12 = COMPUTER2

21 = VIDEO 

22 = S-VIDEO

31 = HDMI 

41 = USB VIEWER 

51 = LAN DISPLAY

INPT ?

Inquiry about input switching

AVMT

Mute control

30 = Video and audio mute disable
31 = Video and audio mute enable

AVMT ?

Inquiry about the mute state

ERST ?

Inquiry about the error state

1st byte: Fan error, 0 or 2
2nd byte: Light source error, 0 or 2
3rd byte: Temperature error, 0 or 2
4th byte: Cover open error, 0 or 2
5th byte: Always 0
6th byte: Other error, 0 or 2
0 to 2 mean as follows: 
0 = No error detected, 1 = Warning, 2 = Error

LAMP ?

Inquiry about the lamp state

1st value (1 to 5 digits):  Cumulative light source operating time (This item 

shows total light source operating hours.)

2nd value: 0 = Light source off, 1 = Light source on

INST ?

Inquiry about the available inputs

The following value is returned.
“11 12 21 22 31 41 51”

NAME ?

Inquiry about the projector name

The projector name set on the NETWORK menu or the Crestron 
RoomView is returned. 

INF1 ?

Inquiry about the manufacturer name

“MITSUBISHI” is returned. 

INF2 ?

Inquiry about the model name

“NW30U” is returned. 

INF0 ?

Inquiry about other information

No other information is available. No parameter is returned.

CLSS ?

Inquiry about the class information

“1” is returned.

•  This projector is fully compliant to the specifi cations of JBMIA PJLink™ Class 1. It supports all the commands defi ned by 

PJLink™ Class 1, and the compliance has been verifi ed with the PJLink™ standard specifi cations Version 1.0.

Advanced features (continued)

Содержание DLP NW30U












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды