EN-6
Preparing your projector
Checking accessories
The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in
the package.
What’s included in the box
AC power cord*
for the U.S.
J2552-0063-03
for
Europe
J2552-0247-00
for the U.K.
J2552-0065-02
for
Australia
J2552-0053-00
for South Korea J2552-0247-00
Computer cable
J2552-0072-05
Remote control
J8947-0355-00
Safety Manual/Quick Start up
CD-ROM
R6 (size-AA) battery (two)
Lens cap (attached to the projector)
Power cord holder
* One of power cords for the U.S., Europe, U.K., Australia, and South Korea is provided appropriately.
Important:
• The attached power cord is to be used exclusively for this product. Never use it for other products.
Battery installation
Use two (AA, R6) size batteries.
Inserting the batteries into the remote control
1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the
arrow.
2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -).
• Load the batteries from - spring side, and make sure to set them tightly.
3. Replace the back cover.
Removing the batteries from the remote control
Remove the back cover of the remote control and take out the batteries.
Caution:
• Use of a battery of wrong type may cause explosion.
• Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries should be used.
• Dispose of used batteries according to your local regulations.
• Before you dispose of the batteries, insulate them by placing insulation tape on the positive (+) and negative (-)
terminals. If you dispose of the batteries together with other conductive objects such as a metal piece, they may
short out, resulting in fi re or explosion.
• Batteries may explode if misused. Do not recharge, disassemble, or heat the batteries, or put them into fi re or water.
• Be sure to handle the batteries according to the instructions.
• Load the batteries with its positive (+) and negative (-) sides correctly oriented as indicated on the remote control.
• Keep batteries out of reach of children and pets. If children swallow the battery, see a doctor immediately.
• Remove the batteries, if the remote control is not used for a long time.
• Do not combine a new battery with an old one.
• If the solution of batteries comes in contact with your skin or clothes, rinse with water. If the solution comes in
contact with your eyes, rinse them with water and then consult your doctor.
• Do not carry or store the batteries together with metallic ballpoint pens, necklaces, coins, or hairpins. Otherwise,
they may short out, causing explosion or liquid leakage and resulting in fi re or injury.
• Do not store the batteries where they are exposed to direct sunlight or subjected to high temperature and high
humidity. High temperature and high humidity may cause corrosion or liquid leakage.
• Do not place the batteries or the battery-installed remote control in a place where temperature rises such as an
area exposed to direct sunlight, near a heat generating device, and near direct heat.
• The lifetime of the batteries is about 1 year. (It varies depending on the usage.)
• Do not drop, hit, or give impact to the remote control. Do not place a heavy object or step on the remote control.
Doing so may cause cracking of the internal board and other failures even if it doesn’t damage the remote control
in its appearance. Handle it with care.
