Mitsubishi Electric 800 Series, Инструкция по установке

Страница: 43 / 78

37
BASIC OPERATION
*1
Situations such as when the MRS/X10 signal is input, during the automatic restart after instantaneous power failure, after auto tuning
is complete, when "SE" (incorrect parameter setting) alarm occurs.
J
MODE key
Switches the operation panel to a different mode.
The easy setting of the inverter operation mode is enabled by pressing this key
simultaneously with the PU/EXT key.
Every key on the operation panel becomes inoperable by holding this key for 2
seconds. The key inoperable function is invalid when Pr.161 = "0 (initial setting)".
(refer to Instruction Manual (Function))
K
SET key
Confirms each selection.
When this key is pressed during inverter
operation, the monitor item changes.
(The monitor item on each screen can be
changed according to the settings of
Pr.52, Pr.774 to Pr.776 .).
L
RUN key
Start command
The direction of motor rotation depends on the Pr.40 setting.
M
STOP/RESET key
Stops the operation commands.
Used to reset the inverter when the protective function is activated.
N
UP/DOWN key Used to change the setting of frequency or parameter.
O
USB connector FR Configurator2 is available by USB connection.
No. Component Name Description
Output
frequency
Output
current
Output
voltage
Initial setting in the monitor mode