Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U, Руководство по установке

Страница: 83 / 143

79
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
Restore
System Menu
Restore Data to Main HDD from Drive 1/2/
Export Drive 1/2 Configuration
This item is used to restore the data from the copy device
to the main device.
Restore Data to Main HDD from Drive 1/2
Range of Restore
1
Export Drive 1/2 Configuration
2
2
System Menu
Restore 4
steps
1, 2
step
4
step
3
step
1. Set the camera number to be restored.
• The button function changes between “All Off”
and “All On” each time you select this button. You
can switch on and off for all the cameras easily
by using this button.
step
2. Set the other detailed settings.
From Device: Sets the device which contains the
data to be restored. The available setting items are
“Copy 1” and “Copy 2.”
From Group: Sets the group which contains the
data to be restored.
To Main: Sets the area to which the data is restored.
The available setting items are “Normal,” “Alarm,”
and “LPA.”
Overwrite: Selects whether or not to overwrite the
existing data.
• “Alarm” appears for “To Main” when “Alarm Recording
Area” (System Menu Memory Data Management
Setting for Main Memory Change Partition Setting)
is set to other than “0 %.”
• “LPA” appears for “To Main” when “Long Pre-Alarm
Area” (System Menu Memory Data Management
Setting for Main Memory Change Partition Setting)
is set to other than “0 %.”
step
3. Set the start or start/end points of restoring.
Start: Sets only the start point of restoring.
Start/End: Sets the start and end points of restoring.
• To restore the data from the oldest data, select
“Set Start Time.” To restore the data to the latest
data, select “Set End Time.”
step
4. Select “Execute.”
• Restoring starts.
• Restoring cannot be performed during recording,
playback, or copying.
• The picture data is processed in 2 MB unit. Therefore
the data is restored in 2 MB unit from the start point
of the designated range when restoring.