manualshive.com logo in svg

Mitel SX-2000 EL, Информационное руководство

Новый Мител SX-2000 EL - удобная и надежная телефонная система для вашего бизнеса. Получите подробное руководство по эксплуатации, скачав информационный мануал с нашего сайта совершенно бесплатно. Посетите manualshive.com для загрузки. Начните использовать свой Мител SX-2000 EL еще сегодня!

Поделиться
Скачать
background image

Configuration

50003510

Revision A

45

SX-200 ML System Configuration

The SX-200 ML system is similar to the SX-200 EL system, page 36, except that the SX-200 
ML control cabinet uses a Main Control Card IIIML (MCC IIIML), holds one Control Dual FIM 
Carrier card or a Control Triple CIM card and supports only one peripheral bay.

Main Control Card IIIML

 - performs call processing and maintains overall control through 

communication with one or two Bay Control Cards. Four megabytes of RAM, one megabyte of 
non-volatile RAM (NVRAM), a System ID Module, a DX module, and a Stratum 3 or Stratum 
4 clock are part of the Main Control Card IIIML. The MCC IIIML provides tone receivers, seven 
DSP receivers, conferencing, and DTMF tone generation.

System Software Storage

 - LIGHTWARE 19 software is provided on a 4-megabyte PCMCIA 

memory card (flash card). The core software occupies 2MB and the BCC III software occupies 
2MB. Because the remote software download requires an extra 2MB of free space, the remote 
software download of LIGHTWARE 19 software must be done in a two-step process. 
When the system is powered up, call processing and maintenance software is loaded from 
PCMCIA memory to the MCC III RAM.

Customers with a 2MB flash card are not able to upgrade to LIGHTWARE 19.

Customer Data Entry Storage

 - CDE software is stored in NVRAM, and can also be stored 

on an off-board personal computer. When the system is powered up, CDE software is loaded 
from NVRAM to the Main Control card RAM.

Bay Control Card

 - interfaces the peripheral cards with the main control card.The bay control 

cards are installed in the main control cabinet and the peripheral cabinet. The SX-200 ML 
system can use the Bay Control Card II (BCC II) or the Bay Control Card III (BCC III). The BCC 
III may support a DSP module (single), page 39, a T1/E1 module, page 39, a Maintenance 
module,, page 37, and a FIM II, page 51, or a CIM, page 51. Note that the BCC III does not 
support a FIM II or a CIM in a main control cabinet. 

Maintenance Module

 - This is an RS-232 driver module that sits on the BCC III in the main 

control cabinet. This module provides a serial port in the main control cabinet for the 
maintenance procedures on the BRI card.

DSP Module (Single)

 - provides 8 CLASS generators for ONS/CLASS sets and provides 16 

conference bridges for Record a Call. This DSP module also provides 16 DTMF receivers thus 
eliminating the need for a Universal Card. The DSP module sits on the BCC III. For CLASS 
functionality, the DSP module must be in the same cabinet as the ONS/CLASS Line card. For 
the Record a Call conference bridges, the DSP module must be in the same cabinet as the 
user’s circuit.

Control Dual FIM Carrier Card

 - supports up to two Fiber Interfaces Module and connects 

them to the backplane. It has a 1 km FIM onboard and a connector to plug in a second optional 
FIM (either a 1 km FIM or an extended FIM).

Fiber Interface Module (FIM)

 - supports the transmission of voice and data signals over fiber 

optic cables. The FIM plugs into the Control FIM Carrier. Three Fiber Interface Modules are 
available with ranges of 1 km, 5 km, and 14 km. Both FIMs at each end of a fiber cable must 
be the same type. 

Содержание SX-2000 EL



































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SX-2000 EL

3Com NBX Quick Reference Manual preview
NBX
Бренд: 3Com Страницы: 2
3Com NBX 100 Planning Manual preview
NBX 100
Бренд: 3Com Страницы: 57
3Com 3101 Quick Reference Manual preview
3101
Бренд: 3Com Страницы: 2
Zazen Alkaline Water Installation Manual preview
Alkaline Water
Бренд: Zazen Страницы: 8
Yealink W76P Quick Start Manual preview
W76P
Бренд: Yealink Страницы: 8
Yealink W56 Quick Reference Manual preview
W56
Бренд: Yealink Страницы: 2
Uniden 1035 Series Owner'S Manual preview
1035 Series
Бренд: Uniden Страницы: 28
Uniden AS1051 Series User Manual preview
AS1051 Series
Бренд: Uniden Страницы: 36
Uniden DCT758-3 - DCT Cordless Phone Manual Del Usuario preview
DCT758-3 - DCT Cordless Phone
Бренд: Uniden Страницы: 84
Telstra V900 TWIN - Manual preview
V900 TWIN -
Бренд: Telstra Страницы: 40
AT&T BELL 2563HB Manual preview
BELL 2563HB
Бренд: AT&T Страницы: 12
Swissvoice XTRA 3355 User Manual preview
XTRA 3355
Бренд: Swissvoice Страницы: 42
Ferguson HearMe CD250BT Instruction Manual preview
HearMe CD250BT
Бренд: Ferguson Страницы: 13
Goodmans GSPK30IP User Manual preview
GSPK30IP
Бренд: Goodmans Страницы: 15
Wheelock UTA-WH Installation Instructions Manual preview
UTA-WH
Бренд: Wheelock Страницы: 6
GAI-Tronics Titan Illuminated Crossing Telephone Installation And User Manual preview
Titan Illuminated Crossing Telephone
Бренд: GAI-Tronics Страницы: 14
Simeon Audita User Manual preview
Audita
Бренд: Simeon Страницы: 32
Magnavox MAS-30037 Specifications preview
MAS-30037
Бренд: Magnavox Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды