manualshive.com logo in svg

Mitel SX-2000 EL, Информационное руководство

Новый Мител SX-2000 EL - удобная и надежная телефонная система для вашего бизнеса. Получите подробное руководство по эксплуатации, скачав информационный мануал с нашего сайта совершенно бесплатно. Посетите manualshive.com для загрузки. Начните использовать свой Мител SX-2000 EL еще сегодня!

Поделиться
Скачать
background image

Feature Description

50003510

Revision A

159

Handsfree Operation

This feature enables users of SUPERSET 4025,  SUPERSET 4125, SUPERSET 4150, 
SUPERSET 410, SUPERSET 420, SUPERSET 430, SUPERSET 3DN, and SUPERSET 4DN 
telephones to have a telephone conversation without lifting the handset.

Headset Mode Feature Key

You can equip SUPERSET telephones with headsets. This feature allows you to turn headset 
operation on and off with a feature key. SUPERSET 401+ and SUPERSET 4001 telephones 
do not support this feature

Headset Operation

SUPERSET telephones can be equipped with headsets. The headset user answers incoming 
calls by pressing the line select key or the SPEAKER ON/OFF key and hangs up by pressing 
the cancel key or hangup softkey.

Customers using the dedicated headset jack on SUPERSET 4015, SUPERSET 4025, 
SUPERSET 4125, or SUPERSET 4150 telephones will automatically go to headset mode when 
a non-amplified headset connects to the dedicated headset jack of that telephone.

Users of SUPERSET 4025 (Rev level G.1 or greater), SUPERSET 4125 (Rev level C.1 or 
greater) and SUPERSET 4150 (Rev level G.1 or greater) telephones can answer a call with 
the handset while the telephone is in headset mode. This allows a person to answer a call 
quickly, when limited time does not allow the user to put a headset on.  These telephones also 
support a single key toggle (the Handset Mute key) between the handset and the headset 
receivers while the set is in the talk state.

The user can combine headset operation with the Auto-Answer feature for complete handsfree 
operation. Auto-Answer is available to all SUPERSET telephones (excluding SUPERSET 4090, 
SUPERSET 401, and SUPERSET 4001 telephones) when the telephone is in headset mode. 
Headsets used with SUPERSET 400 series telephones must be externally powered (amplified). 
Headset operation is not supported on the SUPERSET 4001 telephone.

Headset Operation (Amplified Headset)

You can equip SUPERSET telephones (excluding the SUPERSET 4001 telephone) with 
amplified (externally powered) headsets instead of handsets. You answer incoming calls by 
pressing the line select key or the SPEAKER ON/OFF key and hang up by pressing the CANCEL 
key or HANGUP softkey. You can combine headset operation with the auto-answer feature for 
complete handsfree operation.

Headset User Control

The SUPERSET 4000 series sets have a separate headset jack, so the handset and headset 
can both be plugged in. When a headset is plugged in, the set directs the speech path to the 
headset and disables the handset microphone. This feature is controlled through either a feature 
access code or feature key. To restore to handset operation,  you separate the quick-disconnect 
connector or unplug the headset from the dedicated headset jack.

Содержание SX-2000 EL



































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SX-2000 EL

Jensen JBS-350 Wall Mount Instructions preview
JBS-350
Бренд: Jensen Страницы: 2
Watermark Xsential QUAD-RO Installation And Maintenance Manual preview
Xsential QUAD-RO
Бренд: Watermark Страницы: 8
AT&T CL82107 Quick Start Manual preview
CL82107
Бренд: AT&T Страницы: 33
Viking PNL40-BK Technical Manual preview
PNL40-BK
Бренд: Viking Страницы: 1
Subpac M2X Manual preview
M2X
Бренд: Subpac Страницы: 15
Bang & Olufsen BeoSound 3000 2671 Service Manual preview
BeoSound 3000 2671
Бренд: Bang & Olufsen Страницы: 68
AUDIOLINE TEL 30B User Manual preview
TEL 30B
Бренд: AUDIOLINE Страницы: 12
Cobolt TC1290MS Instruction Manual preview
TC1290MS
Бренд: Cobolt Страницы: 5
Swisscom Aton C3 User Manual preview
Aton C3
Бренд: Swisscom Страницы: 14
AT&T CL83101 User Manual preview
CL83101
Бренд: AT&T Страницы: 40
GE 28300EE2 User Manual preview
28300EE2
Бренд: GE Страницы: 100
Hama PR-2120 Operating Instructions Manual preview
PR-2120
Бренд: Hama Страницы: 76
HydraMaster Diamond Products GTXR+ Owner'S Manual And Maintenance Logs preview
Diamond Products GTXR+
Бренд: HydraMaster Страницы: 49
Uniden DECT1480-2 User Manual preview
DECT1480-2
Бренд: Uniden Страницы: 28
iDM HYGIENIK 2.0 Installation Instruction preview
HYGIENIK 2.0
Бренд: iDM Страницы: 60
Scitec 6003S Datasheet preview
6003S
Бренд: Scitec Страницы: 1
EarthLink Polycom VVX 310 User Manual preview
Polycom VVX 310
Бренд: EarthLink Страницы: 4
BEATFOXX 00075501 User Manual preview
00075501
Бренд: BEATFOXX Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды