manualshive.com logo in svg

Mitel SX-2000 EL, Информационное руководство

Новый Мител SX-2000 EL - удобная и надежная телефонная система для вашего бизнеса. Получите подробное руководство по эксплуатации, скачав информационный мануал с нашего сайта совершенно бесплатно. Посетите manualshive.com для загрузки. Начните использовать свой Мител SX-2000 EL еще сегодня!

Поделиться
Скачать
background image

SX-200 General Information Guide

196

Revision A

50003510

system on DID type trunks are assumed to be outside calls. Callers therefore receive different 
call progress tones. Call handling differs from Tie and DISA trunk type calls, which are assumed 
to be internal calls.

Trunk Operation - Direct Inward System Access (DISA)

The DISA feature allows an external caller to access the system by dialing the directory number 
of a special DISA trunk and then dialing a security code. After the code is dialed the system 
returns Dial Tone to the caller, who may then access any features in the DISA trunk’s COS 
which do not require a Switch Hook Flash. Optionally, the external caller can be required to 
enter a special account code rather than the standard DISA Access Code. See Account Codes 
- Verified (Special DISA), DISA trunks can be supported on many different hardware types. 
See Trunk Support - T1, Trunk Support - DID, Trunk Support - E & M.  A trunk can be 
programmed as DISA at all times, or during night service only.

Trunk Operation - Non-Dial-in CO

CO trunks usually carry calls between the local central office and the PBX. Calls arriving on 
CO trunks are assumed to be outside callers. Callers therefore receive different call progress 
tones. Call handling differs from Tie and DISA trunk type calls, which are assumed to be internal 
calls. CO trunks are assigned an origination point for DAY, NIGHT1, and NIGHT2 service. They 
can optionally be assigned as a dedicated line on a SUPERSET telephone. The NIGHT1 or 
NIGHT2 service for CO trunks can be changed directly from the Attendant Console.

Trunk Operation - Tie

Tie trunks allow incoming trunk calls to reach extensions directly, without attendant intervention 
or assistance. The number of digits expected from the trunk is unknown. Digit absorption and 
adding prefix digits can be done. Calls coming into the system on Tie type trunks are assumed 
to be callers from inside the company, similar to DISA trunk type calls. The callers therefore 
receive the same call progress tones that internal callers hear and may have access to many 
extension features.

Trunk Recall

The Trunk Recall feature provides an alternate recall point for trunks in the system. The alternate 
recall point can be specified for each tenant and each NIGHT/DAY service. Under the following 
conditions, trunks are rerouted to the alternate call point: 

•

For all trunk types, when an extension with a trunk on Consultation Hold is listening to 
reorder tones and times out. The trunk is removed from consultation hold and rerouted.

•

For DISA and CO trunks, when a trunk recalls from campon or ringing an extension. See 
Recall.

Trunk Support - CO (LS/GS)

The SX-200 EL and SX-200 ML systems support CO (LS/GS) trunks with the LS/GS Trunk 
card in digital bays. The SX-200 SPINE supports LS/CLASS trunks with the LS/CLASS trunk 
module. The SX-200 rackmount cabinet supports LS/CLASS trunks with the LS/CLASS Trunk 
card.

Содержание SX-2000 EL



































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SX-2000 EL

Panasonic SC-PM500 Operating Instructions preview
SC-PM500
Бренд: Panasonic Страницы: 2
Panasonic RX-E300 Operating Instrucctions preview
RX-E300
Бренд: Panasonic Страницы: 36
Panasonic SAPM71 - MINI HES W/CD PLAYER Instrucciones De Funcionamiento preview
SAPM71 - MINI HES W/CD PLAYER
Бренд: Panasonic Страницы: 12
Talkswitch TS-200 User Manual preview
TS-200
Бренд: Talkswitch Страницы: 32
Talkaphone VOIP-500 Series Configuration And Operation Manual preview
VOIP-500 Series
Бренд: Talkaphone Страницы: 90
Panasonic SC-CH72 Operating Instructions Manual preview
SC-CH72
Бренд: Panasonic Страницы: 89
Lightspeed AC-CAVWC User Manual preview
AC-CAVWC
Бренд: Lightspeed Страницы: 31
THOMSON DS120ICD Operating Instructions Manual preview
DS120ICD
Бренд: THOMSON Страницы: 63
GLEMM MXP 04 Instruction Manual preview
MXP 04
Бренд: GLEMM Страницы: 16
france telecom e-diatonis L (French) Manual D'Utilisation preview
e-diatonis L
Бренд: france telecom Страницы: 31
ICA AQUA OCEAN AQ4000 Instruction Manual preview
AQUA OCEAN AQ4000
Бренд: ICA Страницы: 16
FMUser FUTH804B 2010 Operating Manual preview
FUTH804B 2010
Бренд: FMUser Страницы: 16
Alcatel 4074 CC User Manual preview
4074 CC
Бренд: Alcatel Страницы: 64
Looperlative LP1 Gen B User Manual preview
LP1 Gen B
Бренд: Looperlative Страницы: 29
Geemarc AMPLIDECT 350 User Manual preview
AMPLIDECT 350
Бренд: Geemarc Страницы: 77
auna 10040054 Manual preview
10040054
Бренд: auna Страницы: 68
Johnson & Starley INTEJAN User Instructions preview
INTEJAN
Бренд: Johnson & Starley Страницы: 2
Gigaset A390 Manual preview
A390
Бренд: Gigaset Страницы: 21

Бренды по названию

Популярные бренды

Загрузить еще бренды