manualshive.com logo in svg

Mitel SX-2000 EL, Информационное руководство

Новый Мител SX-2000 EL - удобная и надежная телефонная система для вашего бизнеса. Получите подробное руководство по эксплуатации, скачав информационный мануал с нашего сайта совершенно бесплатно. Посетите manualshive.com для загрузки. Начните использовать свой Мител SX-2000 EL еще сегодня!

Поделиться
Скачать
background image

SX-200 General Information Guide

136

Revision A

50003510

up to a maximum of 10 digits in length. By default, ANI and DNIS numbers are not recorded in 
SMDR reports.

Automatic Number Identification (ANI) on Outgoing Trunks

This feature is a mechanism that allows the system to identify a calling party on an outgoing 
trunk. The identifying information consists of the calling party’s extension number which is 
transmitted (tones or pulses) on the trunk, after the system has successfully dialed an external 
number on that trunk.

Automatic Route Selection (ARS)

The ARS feature is part of the system software package. It automatically selects one of a 
preprogrammed (programmed during CDE) list of trunk routes every time an outgoing call is 
made. The routes are selected based upon the digits dialed, in order of cost (i.e., least expensive 
route first), and in accordance with the caller’s toll restriction. The use of digit analysis and digit 
modification within the ARS package allows the system to recognize and modify any digit string 
which is dialed by the user, alleviating the need for the user to dial special trunk access codes, 
or to dial a different digit string for each of the various routes to the same destination.

The complete ARS package provides the following: 

•

Alternative Routing

 - automatically selects an alternate trunk route when the first choice 

is busy. Routes (e.g., tie trunks or WATS lines) are preprogrammed in an implied sequence 
of selection within the Route Lists Table.

•

Least Cost Routing

 - enables the customer to capitalize on the cost benefits offered by 

each type of trunk by allowing the installation company to define, via the Route Plans and 
Route Lists Tables, the order in which the trunk groups are to be selected. 

•

Toll Control

 - allows the customer to restrict user access to specific trunk routes and/or 

specific directory numbers.

•

Overlap Outpulsing

 - seizes a trunk and commences outpulsing as soon as sufficient 

digits have been received to identify the route.

•

Expensive Route Warning

 - presents a tone to the user during call setup, and, if a 

SUPERSET 420, SUPERSET 430, SUPERSET 4015, SUPERSET 4025, SUPERSET 
4125, SUPERSET 4090, or SUPERSET 4150 telephone is used, the message EXPEN-
SIVE ROUTE appears on the LCD when the route selected by ARS is programmed as an 
expensive route.

•

Callback Queueing

 - allows the user who encounters busy tone after dialing an ARS digit 

string (i.e., all trunks busy) to dial a callback access code, or, if a SUPERSET 420, SU-
PERSET 430, SUPERSET 4015, SUPERSET 4025, SUPERSET 4125,SUPERSET 4090, 
or SUPERSET 4150 telephone is used, to select CALLBACK, and be placed in a queue 
for the first available trunk.

•

Camp-on Queueing

 - allows the user who encounters busy tone after dialing an ARS 

digit string (i.e., all trunks busy) to wait off-hook, or, if a SUPERSET 420, SUPERSET 430, 
SUPERSET 4015, SUPERSET 4025,  SUPERSET 4125, SUPERSET 4090, or SUPER-
SET 4150 telephone is used, to select CAMP ON and remain off-hook until a trunk 
becomes free.

Содержание SX-2000 EL



































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SX-2000 EL

Samsung iDCS 500 General Description Manual preview
iDCS 500
Бренд: Samsung Страницы: 128
Samsung DCS User Manual preview
DCS
Бренд: Samsung Страницы: 33
Samsung DCS Quick Reference Manual preview
DCS
Бренд: Samsung Страницы: 2
Uniden DXAI5688-2 - DXAI Cordless Phone Manual Del Usuario preview
DXAI5688-2 - DXAI Cordless Phone
Бренд: Uniden Страницы: 68
Uniden DXAI4288-2 Guide Utilisateur preview
DXAI4288-2
Бренд: Uniden Страницы: 72
AeroAudio MOS - UNO - IP Manual preview
MOS - UNO - IP
Бренд: AeroAudio Страницы: 8
Radio Shack ET-551 Owner'S Manual preview
ET-551
Бренд: Radio Shack Страницы: 24
Walton Primo HM3+ User Manual preview
Primo HM3+
Бренд: Walton Страницы: 16
Watts AERCO 58025-05 Technical Instructions preview
AERCO 58025-05
Бренд: Watts Страницы: 24
Uniden TRU548 Owner'S Manual preview
TRU548
Бренд: Uniden Страницы: 68
Lucent Avaya 6402D User Manual preview
Avaya 6402D
Бренд: Lucent Страницы: 9
Toa Scout WT-4810 Operating Instructions Manual preview
Scout WT-4810
Бренд: Toa Страницы: 32
BT Diverse 2015 User Manual preview
Diverse 2015
Бренд: BT Страницы: 70
Everpure XC Filter Cartridge EV9613-09 Specification Sheet preview
XC Filter Cartridge EV9613-09
Бренд: Everpure Страницы: 2
Zeck Audio Daisy VHF Owner'S Manual preview
Daisy VHF
Бренд: Zeck Audio Страницы: 35
Aiphone TB-10M Installation & Operation Manual preview
TB-10M
Бренд: Aiphone Страницы: 12
AT&T EL52115 Quick Start Manual preview
EL52115
Бренд: AT&T Страницы: 45
LD LD WS1000R User Manual preview
LD WS1000R
Бренд: LD Страницы: 128

Бренды по названию

Популярные бренды

Загрузить еще бренды