manualshive.com logo in svg

Mitel SX-2000 EL, Информационное руководство

Новый Мител SX-2000 EL - удобная и надежная телефонная система для вашего бизнеса. Получите подробное руководство по эксплуатации, скачав информационный мануал с нашего сайта совершенно бесплатно. Посетите manualshive.com для загрузки. Начните использовать свой Мител SX-2000 EL еще сегодня!

Поделиться
Скачать
background image

Configuration

50003510

Revision A

57

SX-200 ELx cabinet Rev 4.4 or greater (PN 9109-600-002-NA) with LIGHTWARE 17 Release 
4.0 software or greater. The PRI card also requires a Stratum 3 clock on the main control card. 
The PRI card has the same performance characteristics as a two link ISDN Network Gateway. 
The PRI card (unlike the T1 card) is not classed as a high power card. Because the PRI card 
is a separate bay, the PRI card is not included in the count for the four high power cards. 

FIM II 

The FIM II can sit on a PRI card, BCC III, a Control Triple CIM card, or a Peripheral Interface 
Module Carrier card. A FIM II on a PRI card in a main control cabinet can link a peripheral 
cabinet to the main control cabinet. A FIM II on a PRI card in a peripheral cabinet links the PRI 
card bay to the main control cabinet. A FIM II is only installed on the BCC III in a peripheral 
cabinet; the FIM II in the BCC III connects the peripheral cabinet to the FIM or FIM II in the 
main control cabinet. A FIM II on a Control Triple CIM card links the main control cabinet to a 
peripheral cabinet. A FIM II on a Peripheral Interface Module Carrier card connects the 
peripheral cabinet to the main control cabinet when the peripheral cabinet does not have a 
BCC III to hold a FIM II. The FIM II provides fiber connectivity to the system and sits recessed 
back from the faceplate. The FIM II comes in three variants. The FIM II at each end of the 
connection must be the same variant. 

T1/E1 Module

The T1/E1 module on site 2 of the PRI card provides up to two links of ISDN connectivity. The 
T1/E1 module on site 2 of the BCC III provides up to two T1 links. The links from the module 
have the same functionality as the T1 link that the T1 card provides. The SX-200 only uses the 
T1 type connectivity.

CIM (Copper Interface Module)

The CIM provides copper connectivity between the peripheral cabinets and the main control 
cabinet. The CIM is very cost effective for a system that is co-located. The CIM supports a 
distance of up to 30 meters or 100 feet between cabinets. The CIM has a twisted pair interface. 
The CIM sits on a Peripheral Interface Module Carrier card in a peripheral cabinet, on site 1 of 
the BCC III in a peripheral cabinet, or on site 1 of a PRI card in a main control cabinet or a 
peripheral cabinet. Unlike the FIM II, the CIM sits close to the faceplate and only has one variant.

DSP Module (Single)

The DSP module (single) provides 8 CLASS generators for ONS/CLASS sets and provides 16 
conference bridges for Record-a-Call. The DSP module also provides 16 DTMF receivers thus 
eliminating the need for a Universal Card. The DSP module sits on site 3 of the BCC III.

Maintenance Module

The Maintenance module provides a serial port on the BCC III for BRI card maintenance when 
the BCC III and the BRI card are in the main control cabinet. A mini-DIN (cable is included) 
provides the connection to the PC. The Maintenance module sits on site 1 of the BCC III when 
the main control cabinet has a BRI card.

Содержание SX-2000 EL



































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SX-2000 EL

Yealink T Series Setting Up preview
T Series
Бренд: Yealink Страницы: 2
Teac CX-400iDAB Owner'S Manual preview
CX-400iDAB
Бренд: Teac Страницы: 38
Daewoo MC-5911SC Service Manual preview
MC-5911SC
Бренд: Daewoo Страницы: 21
The Fisher FUTURA F-5593 Operating Instructions And Warranty preview
FUTURA F-5593
Бренд: The Fisher Страницы: 20
Uniden TRU348 Owner'S Manual preview
TRU348
Бренд: Uniden Страницы: 64
Linksys SPA94x User Manual preview
SPA94x
Бренд: Linksys Страницы: 6
Galaxy Audio DHT Any Spot User Manual preview
DHT Any Spot
Бренд: Galaxy Audio Страницы: 12
Jabra speakerphone Manual preview
speakerphone
Бренд: Jabra Страницы: 8
SoundMax SM- MSD11 Instruction Manual preview
SM- MSD11
Бренд: SoundMax Страницы: 43
AVIRE Memco 453 000AU Installation Manual preview
Memco 453 000AU
Бренд: AVIRE Страницы: 18
Hama BA-2180 Operating Instructions Manual preview
BA-2180
Бренд: Hama Страницы: 45
Niceboy VOICE CALL PRO User Manual preview
VOICE CALL PRO
Бренд: Niceboy Страницы: 20
3M PELTOR ComTac 7 Manual preview
PELTOR ComTac 7
Бренд: 3M Страницы: 41
Federal Signal Corporation FT100C-V Setup preview
FT100C-V
Бренд: Federal Signal Corporation Страницы: 12
LG-Ericsson ipldk-60 Feature Description And Operation Manual preview
ipldk-60
Бренд: LG-Ericsson Страницы: 512
RINGSPANN IR Series Installation And Operating Instruction preview
IR Series
Бренд: RINGSPANN Страницы: 6
Geemarc Amplidect350 User Manual preview
Amplidect350
Бренд: Geemarc Страницы: 236
Kenwood MDX-01 Service Manual preview
MDX-01
Бренд: Kenwood Страницы: 30

Бренды по названию

Популярные бренды

Загрузить еще бренды