MISUMI RSH1C, Руководство пользователя

Страница: 55 / 88

4
Periodic Inspection and Maintenance
4-4 Applying grease
4-11
3. Wipe away old grease with a clean cloth. Then apply grease by hand to the ball
screw threads and move the slider back and forth to spread the grease.
●
Greasing the linear guide
There are two methods of greasing the linear guide.
(1)Remove only the end cover to grease the linear guide
(2)Open the cover by pulling it up to grease the linear guide.
Method (1) : Remove only the end cover to grease the linear guide
1. Remove the 2 screws securing the end cover on the motor side, and remove the
end cover.
(For how to remove the end cover, refer to "4-6 Replacing the motor".)
2. Wipe away old grease with a clean cloth. Then use a grease gun to inject new
grease into the two grease nipples on the right and left of the ball guide bearing.
Grease nipple
Grease gun
(Nozzle outside diameter:
9mm or less)