32
1. Blood test
3. Control Solution test
2. Electronic Calibrator test
4. Code Number
After selecting
CS Tst
, the meter will indicate the test strip is warming up to
its operating temperature (40ºC). This is done either by showing the
warming screen below or the countdown timer screen, also shown below, if
the time to add control solution is less than 30 seconds away.
Applying the Control Solution
When the displayed countdown reaches zero, the meter will indicate that the
control solution can now be applied to the test strip.
Holding the prepared control solution vial with the tip down, gently shake or
tap the bottom of the vial to make the solution move down to the dropper.
1
2
3
4
