9
Section 4 Initial Setup
Before turning the meter on, insert the code chip (found inside the box of test
strips) into the code chip slot on the right side of the meter. This is shown
below. This will transfer the test strip testing parameters into the meter.
Note:
Ensure the code number printed on the code chip is the same as
that printed on the test strip box and the same as the number
shown on the meter test screen when a test strip is inserted.
Code #
Press the
power button
(right button) to turn the meter on. The Setup
menu will be displayed after the power-on diagnostics test screen. The
Code #
will be highlighted when the meter is turned on. Press
OK
to view
the current
Code #
from the code chip. The code chip number is also
displayed when a test strip is inserted, after the meter is turned on and
patient ID has been entered.
