11
Section 5 Meter Setup and Options
Memory Review
Select
Data Log
and press
OK
to review previous PT/INR Meter test results.
The following screen will be shown.
The last test result will be displayed showing the test INR or INR+PT value,
date, time, its test number and corresponding patient ID. Pressing
Down
will
show the previous result, if any. Pressing
Up
will move to the oldest test in
the test result list.
To print the data log(s), connect the printer to the RS232 printer connection
port at the top of the meter and press
PRT/EX.
The next screen will show the
printing options of one log or ten logs.
One
means printing the current
displayed log, while
Ten
means printing 10 consecutive logs starting from
the current log. Press
Exit
to quit the print screen and to go back to the Data
Log screen. When finished reviewing the test results, press and hold down
the
PRT/EX
button until the display returns to the previous menu selection
screen.
Deleting Stored Readings
When reviewing stored readings in the section above, all readings can be
deleted by momentarily pressing both the
Up
and
Down
buttons at the same
time. This will display the Delete Log screen below, with
Delete Log?
