misia XM SERIES Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 76

background image

ELECTRIC WIRE ROPE HOIST

XM SERIES

5

1 . PRELIMINARY INFORMATION

MISIA manufactures and distributes electric wire hoists
under the company quality system in compliance with
the standards: UNI EN ISO 9001, with the following
international certificates released by the BV test
company: ACCREDIA - Italy.

Plate types:
• Identification plate for the hoist/trolley
• Hoist and travel motors plate
• Blocks plate

1.4 MANUAL UPGRADING

This manual illustrates the state-of-the-art machine at
the time it was introduced on the market. This manual
is part of the machine and complies with all laws,
directives and regulations in force at this time, therefore,
this manual cannot be considered inadequate solely
because it was subsequently updated due to new
information becoming available.

Any changes, adaptations, etc. to the machine sold in
the future do not oblige the manufacturer to intervene
on the previously supplied equipment, nor should the
manual or the equipment be considered lacking or
inadequate.

Any integrations to the manual sent by the
manufacturer to users must be saved with the
relevant manual.

FACSIMILE

1.3 LIABILITY

The instructions in this manual do not substitute,
but only summarise the obligations stated by
the actual safety and injury prevention laws and
regulations.

With reference to the content of this instructions
manual, MISIA declines any liability in the following
cases:
• Use non-compliant with national safety and injury

prevention laws and regulations:

• Defective layout of the structures on which the hoist

is intended to operate;

• Failure to read or comply with the instructions in this

manual;

• Faults in the main power supply;
• Unauthorised changes to the hoist;
• Use by untrained staff.

Readability and preservation of plates

Plates must always be maintained in a readable
condition for all their details and periodically cleaned. If
only some of the information on the plate deteriorates
or is no longer legible, we recommend ordering a new
plate from the manufacturer quoting the data in this
manual or on the original plate, especially the serial
number and proceed to replace it.

«
...
3
4
5
6
7
...
»

Содержание XM SERIES













































































Отзывы:

Нет отзывов

Похожие инструкции для XM SERIES

Бренд: Bannon Страницы: 14

Бренд: Sealey Страницы: 2

Бренд: Sealey Страницы: 3

Quality MACHINERY LH750.V2

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 5

Бренд: Sealey Страницы: 5

Бренд: Sealey Страницы: 5

Бренд: Coffing Hoists Страницы: 28

Бренд: Yale Страницы: 28

Бренд: WARRIOR Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды