misia XM SERIES, Инструкция по установке, эксплуатации и обслуживанию

Страница: 43 / 76

43
ELECTRIC WIRE ROPE HOIST
XM SERIES
3. INSTALLATION INSTRUCTIONS
* NB: The measures indicated for the type 83 are for
beam flange up to max 300 mm.
For bigger rail flange, the measures increases 12 mm
every 10 mm rail width.
NB: Not available for Type 5C1 and 53C1.
Block size (minimum measurement c).
Version S2 (2 rope falls)
Table 8
XM
Type
5 5C1 3 83* 53 53C1
C1 C2 C3 C4 C5 C6
308 570 895 1080 70 570 900
312 640 965 1140 680 640 965
316 640 965 1140 680 640 965
525 730 1110 1180 730 730 1110
740 840 1370 1630 - 840 1370
750 840 1370 1650 - 860 1370
950 1100 1725 1990 - 1100 1700
963 1100 1725 2150 - 1100 1700
980 1100 1725 - - 1100 1750
1100 1330 - - - 1330 -
1125 1330 - - - 1330 -
Version S4 (4 rope falls)
XM
Type
5 5C1 3 83* 53 53C1
C1 C2 C3 C4 C5 C6
308 520 845 1020 680 520 845
312 590 925 1120 620 590 920
316 640 965 1140 640 640 965
525 730 1130 1290 700 650 1030
740 825 1355 1600 - 830 1360
750 880 1410 1740 - 850 1380
950 1000 1625 1960 - 1000 1630
963 1000 1625 1960 - 1000 1630
980 1080 1705 2040 - 1180 1810
1100 1170 - - - 1270 -
1125 1170 - - - 1270 -
Run the lower block along the whole pre-set
hook stroke and check that it stops correctly
when it reaches the stopper on its way up and
down.
For a hoist with a double rail trolley Type 53,
the internal edge of the hook jaw should be not
be deeper than the lower edge of the beam.
The setting of the down limit switches must
stop lowering when the lower edge of the hook
has reached a distance of 500 mm from the
floor.
C min.
Hook str
oke
Monorail
Double rail
500 min
Monorail
Double rail