Mirion Technologies UltraRadiac-Plus, Руководство пользователя, Страница: 49 / 81

Chapter 5 Setting Up the Unit
Setting the Alarm Threshold
To set the threshold for the selected alarm
level:
•
Press the
CLR/TEST
key; the decimal
point and the threshold unit indicator
will begin to flash.
•
Repeatedly press the
DOSE
key until
the desired decimal point location and
threshold unit indication are displayed.
•
Press the
CLR/TEST
key. This action
will lock in the selected decimal point
location and threshold unit indication.
•
The left-most digit will begin to flash.
•
Repeatedly press the
DOSE
key until
the desired value of the digit is
displayed.
•
Press the
CLR/TEST
key to lock in the
digit’s value. The next digit will begin
to flash.
•
Repeat the above two steps to select and
lock in each of the two remaining
digits.
•
When the last digit has been set, the
entire threshold value and unit will
flash.
40