Miranda RCP-200 Скачать руководство пользователя страница 2

Страница: 2 / 49

GUIDE TO INSTALLATION AND OPERATION

RCP-200

Electromagnetic Compatibility

This equipment has been tested for verification of compliance with FCC Part 15, Subpart B

requirements for Class A digital devices.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

This equipment has been tested and found to comply with the requirements of the EMC directive

2004/108/CE:

•

EN 55022: 1998, Class A

•

EN 61000-3-2: 2006, Class A

•

EN 61000-3-3:1995, A1 (2001), A2 (2005)

•

EN 61000-4-2:1995, A1 (1998), A2 (2001)

•

EN 61000-4-3:1996, A1 (1998)

Safety Compliance

The power supply complies with the requirements of the following standards:

•

UL 60950-1 (2nd Edition) Safety of Information Technology Equipment

•

IEC 60950-1 (2nd Edition) Safety of Information Technology Equipment

•

EN 60950-1 (2nd Edition) Safety of Information Technology Equipment

How to contact us:

For technical assistance, please contact the Miranda Technical support centre nearest you:

Americas
Telephone:

+1-800-224-7882

e-mail:

[email protected]

Asia
Telephone:

+852-2539-6987

e-mail:

[email protected]

Europe, Middle East, Africa, UK

Telephone:

+44 (0) 1491 820222

e-mail:

[email protected]

China
Telephone:

+86-10-5873-1814

e-mail:

[email protected]

France (only)
Telephone:

+33 (0) 1 55 86 87 88

e-mail:

[email protected]

Visit our web site at

www.miranda.com

Содержание RCP-200


















































Результаты поиска

Содержание RCP-200

Отзывы:

Похожие инструкции для RCP-200

Бренды по названию

Популярные бренды

Miranda RCP-200, Руководство по установке и эксплуатации

Результаты поиска

Содержание RCP-200

Отзывы:

Похожие инструкции для RCP-200

Бренды по названию

Популярные бренды