
GUIDE TO INSTALLATION AND OPERATION
RCP-200 |
27
5.3.2 Locating a device using the Router view in Device Selection Mode
To locate a device for control using the ROUTER view, push the ROUTER button beneath the left screen.
•
These instructions are valid when you have selected
iControl Services
in the Router view configuration panel
(see section 5.3 above)
•
If you have selected a Router instead of iControl Services, go to section 5.3.3
The appearance and functionality of the Router View display depends on the GUI style you have selected in the Router
View configuration (See section 5.3.1 for detailed descriptions of each), but the basic principle applies to both.
1. Touch the alpha-numeric keys to enter the identity of the device in the Pst data box on the screen.
2. The left-hand screen display will update after each touch to show all keys that are active to enter the next segment
of the device name.
3. After the first touch, the back-arrow and clear (ANS-GUI only) keys will be active:
•
Back-arrow = undo the last keystroke
•
Clear = clear the Pst data box and go back to the top level (Alpha-numeric sorter GUI only)
•
To begin again in Category Index GUI, touch an alphabetic key
4. When the complete device identity has been entered,
•
No alpha-numeric keys will be enabled
•
The complete device identity will be shown in the Pst data box
•
The
Arm Pst /Arm Preset
key will be enabled
5. Touch the
Arm Pst /Arm Preset
key to select the device for control
•
The device’s control panels will appear in the right hand screen, provided the device is supported.
5.3.3 Controlling a Router with the RCP-200 in Router Control Mode
From the ROUTER view of the RCP-200, you may select and operate a router that is accessible via iControl.
To operate a router using the ROUTER view, push the ROUTER button beneath the left screen.
•
These instructions are valid when you have selected a router in the Router View configuration panel (see section
5.3 above)
•
If you have selected iControl Services instead of a router, go to section 5.3.2.
The appearance and functionality of the Router View display depends on the GUI style you have selected for the
Router View on this RCP-200 (See section 5.3.1 for brief descriptions of each, and sections 5.3.4 and 5.3.5 for more
detailed descriptions), but the basic principle applies to both.
NOTE: all labels for router inputs and outputs are established using iRouter, and cannot be modified using the
RCP-200.
When a router has been selected, the ROUTER view displays router status and operating controls.
•
The Router View operating controls appear only on the left-hand screen of the RCP-200
•
A matrix of input/output selectors is shown on the upper left.
•
The matrix displays either Sources or Destinations
Sources are shown on a green background
Destinations are shown on an orange background