3. Getting started
MiR AI Camera Getting started (en) 09/2019 - v.1.0 ©Copyright 2019: Mobile Industrial Robots A/S.
12
5.
Place the camera mount back in the desired position, so the mounting holes align with
the drill holes in the wall. Screw the M4 screws into the wall to fix the camera mount in
place.
6.
Fix MiR AI Camera to the camera mount. Tighten the bolt at the end of the mount, and
ensure that the camera is fastened securely.
7.
Adjust the angle of the camera so it is oriented in the correct direction. You must loosen
up the bolts in the mounting pieces to adjust the orientation.
8.
Plug in the power cable to turn on the AI camera. It may take up to a minute for the cam-
era to turn on. The indicator light will light up in white when the camera is starting up.
9.
Once the light turns yellow, the camera is ready to be connected to a network. There are
two options for connecting MiR AI Camera to your MiRFleet network:
•
Connect the camera to a nearby Ethernet port that is connected to the same network
that MiRFleet is on.
•
Screw in the WiFi antenna and continue to the next section for instructions on con-
necting the camera to the network.
3.4 Connecting to MiR AI Camera
It is possible to connect to the MiR AI Camera directly using an Ethernet cable or wirelessly
through WiFi.
Connecting through Ethernet
Connect MiR AI Camera to the same network as your MiRFleet using an Ethernet cable.
Check that MiRFleet has connected to the camera by signing into MiRFleet and going to
Setup > AI cameras
. Your AI camera should appear under
New cameras
. It can take a little
