MIOX RIO Zuni 1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 46

MIOX RIO Zuni™ Operators Manual
P/N: 102-00094-I Page 5
INTRODUCTION AND OVERVIEW
This manual is intended to provide basic installation, operation, and maintenance guidelines
for the operator of the RIO Zuni™ on-site generator (OSG). Variations between model types
may cause the images in this manual to not directly reflect the setup of every unit.
Properly operating and maintaining the system will increase cell life and overall system
performance. If you encounter problems or have questions not covered in this manual,
please contact MIOX Service at 1-888-646-9457.
Regulatory Compliance
U. S. Environmental Protection Agency (US EPA)
On-site generated oxidants are listed as a compliance technology for water disinfection. To
be listed as a compliance technology, the system must be cost effective and achieve
compliance with the regulated maximum contaminant levels (MCLs), and the operator must
be capable of reliably operating the technology. The on-site oxidant category was added to
this list in 1997 primarily based on independent research of MIOX technology.
List of Certifications
EPA Registration Number: 69723-NM-001
NSF International
MIOX maintains a policy of verification and compliance of MIOX technology for water
applications. The NSF Standard provides the criteria used to evaluate the public health
safety of materials, components, products, or systems that contact drinking water, drinking
water chemicals, or both. For details of specific NSF standards for specific MIOX equipment,
please consult with MIOX. NSF listings are also available through NSF International at (800)
NSF-Mark or their web site at www.nsf.org.
State Approvals
MIOX maintains a policy of obtaining state regulatory approval in all states where MIOX
equipment is installed and operated. MIOX has never been rejected for approval in any
state. For a complete list of states currently approving on-site oxidant technology, please
contact MIOX.