MIOX RIO Zuni 1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 46

MIOX RIO Zuni™ Operators Manual
P/N: 102-00094-I Page 19
Installing the RIO Zuni
1) Unpack The Boxes
Unpack the RIO Zuni OSG and all included components.
2) Position the OSG
Tabletop configuration: Place the RIO Zuni OSG on a flat, level surface.
Integrated Brine Tank configuration: Place the RIO Zuni OSG on the integrated
brine tank by following instructions in the Integrated Brine Tank Manual.
3) Install Inline Pressure Reducer
Following the instructions in the Appendices for installing the Inline Pressure
Reducer, connect the water source to the water inlet of the OSG through the Inline
Pressure Reducer.
4) Connect Water Source
Tabletop configuration:
Connect water source to brine source.
Integrated Brine Tank configuration:
Connect pressurized water source to the brine tank using the 1/4” diameter LDPE
tubing. Secure with hose clamps. Leave valves closed.
5) Connect Water & Brine Inputs to OSG
Use the smaller diameter clear vinyl tubing to connect the water and brine feeds to
the OSG. Secure with hose clamps. Leave valves closed.
6) Load Salt
Load the brine tank with salt. If Integrated Brine Tank was ordered from MIOX,
follow instructions in the Integrated Brine Tank Manual.
NOTE: Only use salt that meets or exceeds the salt quality
specifications in the MIOX Salt Guidelines.
7) Connect Oxidant Tank
Connect the oxidant outlet to the oxidant tank using the larger diameter clear vinyl
tubing and hose clamps. If Oxidant Storage Tank was ordered, follow installations
instructions in the Oxidant Tank Manual.
8) Install Level Switch
Plug the level switch assembly cable into the electrical I/O panel of the OSG. Follow
installations instructions in the Oxidant Tank Manual for the Level Switch
Assembly.