Minuteman ERide 21, Руководство по обслуживанию

Страница: 74 / 91

10.5 DISASSEMBLY/ASSEMBLY OF THE
CLEAN WATER SIGHT GAUGE
REMOVAL
1. Empty the detergent solution tank (or washing water) (See the
procedure in the User and Maintenance Manual).
2. Make sure that the machine cannot move independently, and then turn
the ignition key to " 0" and take it out.
WARNING
Wear gloves and protective clothing suitable for the task.
3. Operating carefully, using a sharp knife, remove the dipstick (1, Figure
10 5 ) to be replaced 10-5 ) to be replaced.
ASSEMBLY
4. Operating on the tank of the machine, clean the adhesive residue from
the dipstick housing; if necessary degrease the bonding area by means
of a solvent. Clean and degrease the gluing perimeter of the new
dipstick to be fitted.
5. Apply a uniform bead of "Gelson 30430 MS-Flex 445 Auto glass Repair
Technicians MS-polymer based sealant" adhesive, or equivalent, without
interruption, to the entire gluing perimeter of the new dipstick to be
mounted.
6. Place the dipstick in the tank housing (1) and make the adhesive stick
by pressing gently.
7 Apply the adhesive tapes positioning the dipstick on the tank 7. Apply the adhesive tapes positioning the dipstick on the tank.
8. Let the adhesive dry for 18 hours with the machine off.