Minuteman ERide 21, Руководство по обслуживанию

Страница: 30 / 91

CHAPTER 7
BRUSH SYSTEM
•The significant maintenance/replacement procedures relating to the Brush
system are described in this chapter.
•In addition troubleshooting is described in the final section.
7.1 CLEANING DISC BRUSHES
CAUTION! The use of work gloves is
recommended when cleaning the disc brush, due to the
possible presence of sharp debris.
1 Remove the disc brush (See the procedure in the User and Maintenance 1. Remove the disc brush (See the procedure in the User and Maintenance
Manual ).
2. Wash and clean the disc brush (1, Figure 7-1 ) of dirt and debris; use
water and detergent solution.
3. Fit the disc brush (See the procedure in the User and Maintenance
Manual ).
Manual ).
4. The disc brush must be replaced due to excessive wear, when in the
condition of brush lowered, the side pins (2,
Figure 7-1 ) rest on the lower
ends (3) of the slots.