Hako Scrubmaster B25
1.
Disconnect mains plug of the charger from outlet and fasten to holder
1.
2.
Pull the filling opening cap
2
towards you and remove it and fill the clear
water tank
3.
Control the filling level by the filling level indicator
4.
3.
Turn the machine on by keeping button
5
pressed approx. 3 sec.
4.
Adjust the height of the operating bar with the locking lever
6
.
5.
Switch suction turbine on with button
8
(corresponding symbol
9
in the
display) and water with button
10
(corresponding symbol
11
in the display).
6.
Use the starting handle
12
to switch on the cleaning functions.
7.
Push the machine forwards. Use button
10
to adjust the water (if
necesssary).
NOTE! Make sure that pad/brush is installed!!!
OPERATION:
Quolified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for authomatic machines (low-foaming)!
Please pay attention to the informations in the instruction manual!
1
3
2
5
4
6
8
12
9
11
10
12